|
Model
No.
|
4-DIGIT
INDICATOR/CONTROLLER |
|
INFC
Series
|
4-digit
(9999) meter. Standard features include a wide selection
of signal input choices, peak value recall, front-panel
tare (on applicable model), sensor excitation, large digital
offset capabilities for display in engineering units. Options
include dual 5 A form C relay outputs and scalable DC volt
or mAdc outputs, NEMA-4 splash proof cover. |
| Note:
Output
options unless noted, are not field installable and must
be specified at time of order. |
|
INPUT
TYPE
|
DESCRIPTION |
PRICE
|
|
|
Process
meter accepts 0-100 mV, +50 mV, 0-5 V, 1-5 V, 0-10 V, +5
Vdc, 0-20 mA and 4-20 mAdc inputs, with 5, 10, 12 or 24
Vdc sensor excitation. Standard features include
3-color programmable large display. Factory default setup
is 4-20 mA input with 24 V sensor excitation and scaled
to display 0-100.0 |
$245.00
|
|
|
Strain
gage meter that accepts 0-100 mV, +50 mV, 0-5 V, 1-5 V,
0-10 V, 4-20 mA or 4-20 mAdc signal inputs. Standard features
include 3-color programmable large display, sensor excitation
of 5, 10, 12 or 24 Vdc. Factory
default setup is 0-100 mVdc input with 10 Vdc sensor excitation
and scaled to display 0-100.0 |
$245.00
|
|
|
Temperature
meter that accepts type J, K, T and DIN J thermocouples.
Standard features include resolution of 0.1° or 1.0°, °F
or °C indication and 3-color programmable large display.
Factory default setup is type K thermocouple input in°F |
$245.00
|
|
|
Temperature
meter that accepts 2-, 3- or 4-wire 100ohm platinum RTDs.
Standard features include resolution of 0.1° or 1.0°, °F
or °C indication and and 3-color programmable large display.
Factory default setup is 3-wire input, alpha =0.00385 shown
in °F |
$245.00
|
|
|
Temperature
meter that accepts most popular thermistor inputs such as
series 400 and 700 sensor inputs. Standard features
include accuracy of +0.1°C, resolution of 0.1° or 1.0°,
°F or °C indication. Factory default setup is 2252ohm
@ 25°C input type, in °F |
$245.00
|
|
|
Differential
temperature meter that accepts type J, K, T and DIN J
thermocouples. Standard features include front-panel
selection of T1, T2 or T1-T2 indication, resolution of 0.1°
or 1.0°, °F or °C indication and dual setpoints.
Factory default is type K thermocouple shown in °F |
$345.00
|
|
|
Differential
temperature meter that accepts 2-, 3- or 4-wire 100 ohm
platinum RTDs. Standard features include a choice of
0.00385 or 0.00392 alpha curves, resolution of 0.1° or 1.0°,
°F or °C indication.
Factory default setup is 3-wire input, alpha = 0.00385 shown
in °F |
$345.00
|
|
|
Temperature
meter that accepts type J, K, T and DIN J thermocouples
and has time proportional relay and open-collector outputs.
Standard features include resolution of 0.1° or 1.0°, °F
or °C indication, analog and dual relay outputs. Factory
setup is type K thermocouple shown in °F |
$395.00
|
|
|
Temperature
meter that accepts 2-, 3- or 4-wire 100 ohm platinum
RTDs and has time proportional relay and open-collector
outputs. Standard features include resolution of 0.1° or
1.0°, °F or °C indication, analog output and dual relay
outputs. Factory default setup is for 3-wire input, alpha
= 0.00392 shown in °F |
$395.00
|
|
|
pH
controller 0.00 to 14.00 pH. Standard features include
automatic or manual temperature compensation, quick calibration
to 4, 7, and 10 pH, accepts most BNC combination pH electrodes
with or without 100 ohm RTD, analog output and dual relay
outputs.pH
controller 0.00 to 14.00 pH |
$395.00
|
|
|
ORP
controller -2V to +2V. Standard features include display
of calibrated ORP or RAW millivolt values, analog output
and dual relay outputs. Includes on-line or manual calibration |
$395.00
|
|
|
Combination
pH/ORP controller. Includes analog and dual relay outputs
|
$495.00
|
|
OPTIONS
|
DESCRIPTION |
PRICE
|
|
POWER
AND LED COLOR
|
|
0
|
Designates
115 Vac power and red LED display |
N/C
|
|
1
|
Designates
230 Vac power and red LED display |
N/C
|
|
2
|
Designates
115 Vac power and green LED display |
N/C
|
|
3
|
Designates
230 Vac power and green LED display |
N/C
|
|
4
|
Designates
10-32 Vdc power and red LED display |
$95.00
|
|
5
|
Designates
10-32 Vdc power and green LED display |
$95.00
|
|
6
|
Designates
26-56 Vdc power and red LED display |
$120.00
|
|
7
|
Designates
26-56 Vdc power and green LED display |
$120.00
|
|
CONTROL
OUTPUT(S)
|
|
0
|
No
control outputs |
N/C
|
|
1
|
Dual
5 A, form C relay outputs |
$70.00
|
| - |
*
Standard on INFCpH, INFCOP, INFCOR, INFCTP, INFCRP |
N/C
|
|
ANALOG
OUTPUT
|
|
0
|
No
analog outputs |
N/C
|
|
1
|
Analog
output selectable in volts DC or mAdc |
$80.00
|
| - |
*Standard
on INFCpH, INFCOP, INFCOR, INFCTP, INFCRP |
N/C
|
|
2
|
Isolated
Analog output selectable in volts DC or mAdc |
$90.00
|
| -- |
*Must
be ordered with a Dual Relay Control Output Option |
-
|
|
ACCESSORIES
|
|
TP1A
|
Trimplate
panel adapter. Adapts DIN1A/DIN2A cases to larger panel
cutouts |
$30.00
|
|
ADD-ON
OPTIONS
|
|
TP1A
|
Trimplate
panel adapter. Adapts DIN1A/DIN2A cases to larger panel
cutouts |
$30.00
|
