P5000 - INFINITY Multi-Function Meter for Batch Control, Rate Indication & Totalization

MULTI-FUNCTION METER
for BATCH CONTROL, RATE INDICATION & TOTALIZATION

P5000
	Frequency Ratemeter
	Frequency Ratio
	Up or Down Totalizer/ Batch Controller
	RS-232C and HI, LO and GO Open-Collector Outputs Standard
	Analog Output for Rate or Total (Optional)

NEWPORT PRODUCT INFO

• MANUAL PDF Version P5000/P6000
• MANUAL PDF Version INPUT OPTIONS
• MANUAL PDF Version OUTPUT OPTIONS
• MECHANICAL (Connections Diagram)
• MECHANICAL (1/8 DIN Case)
• PRICE

•

REQUIRES ADOBE ACROBAT - HELP

Shown with FP7000 Series paddlewheel flow sensor
sold separately.

The P5000 microprocessor-based, 6-digit, 1/8 DIN panel instrument can be configured by front-panel keys or by a personal computer as a frequency meter/ tachometer, frequency-ratio meter, period/ period-average meter, time-interval/time-interval-average meter, reset stopwatch, and cumulative timer or totalizer/1-stage batch controller. However, the P5000 display cannot toggle between rate and total. Two signal inputs can be used to provide frequency ratio or time-interval measurements.

Five Operating Modes
In the frequency meter, the minimum display update rate is equal to 1 period of the frequency input. Thus, very low frequency measurements are displayed and updated faster than most conventional frequency meters. Only two sensors are required to measure the rate of a moving object. The P5000 can be set up as frequency-ratio meter, ideal for monitoring flow ratios.

The P5000 can be set up as an up or down totalizer/1-stage batch controller at rates up to 7 MHz. The display capacity is –99,999 to 999,999 counts with exponential format up to 9.99 E9. Upon ac power loss, the latest reading is automatically saved in non-volatile RAM and is restored upon return of power.

SPECIFICATIONS

TTL INPUT
Speed and Protection Levels (jumper selectable): 7 MHz, 0-5 V; 100 kHz, -20 to +25 V; 3 kHz, -20 to +25 V
Isolated Input Sensitivity (square-wave input): ±10 mV, 0 to 1 kHz; ±25 mV, 0 to 1 kHz; ±50 mV at 100 kHz Requires PGA1
NPN or PNP Open-Collector Sensor Excitation Output: 12.4 V at 20 mA

COMMON SPECIFICATIONS (All Input Types)
Number of Inputs: 1 or 2 (2 inputs for frequency ratio and time interval only)
Update Rate: 60 msec to 99.99 sec, field programmable

OPERATION MODES
Frequency/Tachometer Mode– Frequency Range: 10-6 Hz to 7 MHz
Accuracy at 25°C (square wave): ±0.0002% (+2 ppm)
Totalizer Display–Offset (preset): –99,999 to 999,999

ISOLATED ANALOG INPUT
Accuracy: better than 99.9%
Non-Linearity: 0.05% FS
Isolation: 350 Vdc between output and input
Power: 230 Vac, 10-32 Vdc
AC Frequency: 49-440 Hz
Power Consumption, Typical: 7.5 W max.
Battery Backup: user-supplied 6-12 Vdc, 60 mA to maintain operation, 400 mA with display
Dimensions: 1.9" H x 3.8" W x 5.9" D (48 x 96 x 150 mm); 1.77" x 3.62" (45 x 92 mm ) cutout

ON/OFF CONTROL & ALARM OUTPUTS
Standard: three open-collector transistors, rated 150 mA sink, 30V
Optional: two form C relays rated 8 A, 30 Vdc, or 240 Vac, resistive load (for rate alarm or batch control)
Analog Output Optional: isolated, scalable, internally powered and field selectable for 0-10 V, 4-20 mA, or 0-20 mA. Rangeable over 4 left most or right most digits, suitable for rate or total display.
Min. Impedance for 10 V: 500ohm
Max. External Impedance for 20 mA: 600ohm

Input Options
‘0’ = Standard input, dual-channel input board, non-isolated TTL/5 V CMOS-level, frequency range of 10-6 to 7 MHz. Default calibration: 0 to 10 kHz = 0 to 10000.0.

‘1’ = Isolated single-channel input board with sensor excitation, protected for signals up to 260 Vac. (P6A1). Default calibration: 0 to 10 kHz = 0 to 10000.0.

‘2’ = Non-isolated dual-channel input board with sensor excitation. Protected for input signals up to 260 Vac RMS. (P6A2). Default calibration: 0 to 10 kHz = 0 to 10000.0

‘3’ = Non-isolated single-channel input board with sensor excitation. Protected for input signals up to 60 Vac RMS. (P6A3). Default calibration: 0 to 10 kHz = 0 to 10000.0

‘4’ = Isolated analog-to-frequency single-channel input with 24 Vdc, 0-1 mA, 4-20 mA dc, 1-5 Vdc, and 0-10 Vdc (P6A5).

To Order (* Complete Model No.) Prices Shown in U.S. Dollars

P5	*( )**	*( )**	*( )**	Description	Price
-	-	-	-	Power	-
-	0	-	-	115 Vac power	$380
-	1	-	-	230 Vac power	$380
-	4	-	-	9 to 32 Vdc power	$460
-	-	-	-	Output Option	-
-	-	0	-	None	N/C
-	-	1	-	Isolated BCD	$110
-	-	2	-	Two 8 A form ‘C’ relays	$80
-	-	3	-	Analog Output	$155
-	-	-	-	Input Configuration	-
-	-	-	0	TTL/5VCMOS	N/C
-	-	-	1	Isolated single channel	$95
-	-	-	2	Isolated dual channel	$110
-	-	-	3	Non-isolated single channel	$65
-	-	-	4	Analog to frequency	$135

Ordering Example: P5021= 115 Vac power, two relays, and isolated single channel input, $380 + 80 + 95 = $555.