 |
4
1/2 DIGIT PROCESS RECEIVER
MODEL 2002B-P / 3002-P
Option -E Process meter with Transmitter Excitation
Model 2002B-P is a low-cost, high-resolution 4 1/2 digit panel meter for process signals that require zero and span adjustment for readout in engineering units. The resolution is 1 part in ±19,999 counts, or 0.005% of full scale. Accuracy is up to 99.98% of reading.
The 2002B-P can be used in ratiometric pot-follower applications to determine liquid level or valve setting from the position of a potentiometer wiper. The required external reference voltage can be derived from the meter's own 4.7 V dc supply. The 2002B-P is housed in a short 1/8 DIN case that requires less than 4.1 in (104 mm) behind the panel. A screw-terminal barrier strip is standard for signal and power. Options include isolated 9-32 V dc and 26-56 V dc power. A splash-proof lens cover which meets NEMA-4 requirements allows the 2002B to be used in harsh industrial environments.
SPECIFICATIONS
ANALOG INPUT
Span range: 0 to 19,999 counts
Zero range: 19,999 to +19,999 counts
REFERENCE
Internal (standard): 1.0 V ±5%, 12 kohm source resistance
External (ratiometric): 0.5 to 2.0 V, 680 kohm input resistance
ACCURACY AT 25°C
MODEL 2002B-P / 3002-P
Option -E Process meter with Transmitter Excitation
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Model 2002B-P is a low-cost, high-resolution 4 1/2 digit panel meter for process signals that require zero and span adjustment for readout in engineering units. The resolution is 1 part in ±19,999 counts, or 0.005% of full scale. Accuracy is up to 99.98% of reading.
The 2002B-P can be used in ratiometric pot-follower applications to determine liquid level or valve setting from the position of a potentiometer wiper. The required external reference voltage can be derived from the meter's own 4.7 V dc supply. The 2002B-P is housed in a short 1/8 DIN case that requires less than 4.1 in (104 mm) behind the panel. A screw-terminal barrier strip is standard for signal and power. Options include isolated 9-32 V dc and 26-56 V dc power. A splash-proof lens cover which meets NEMA-4 requirements allows the 2002B to be used in harsh industrial environments.
SPECIFICATIONS
ANALOG INPUT
|
Signal
Range
|
4-20
mA
|
1-5
V
|
0-10
V
|
|
Resolution
|
0.8
µA
|
0.2
mV
|
0.5
mV
|
|
Input
resistance
|
130
ohm
|
1
Mohm
|
1
Mohm
|
|
Bias
current
|
50
pA
|
10
pA
|
5
pA
|
|
Maximum
input
|
55
mA
|
250
V
|
250
V
|
Span range: 0 to 19,999 counts
Zero range: 19,999 to +19,999 counts
REFERENCE
Internal (standard): 1.0 V ±5%, 12 kohm source resistance
External (ratiometric): 0.5 to 2.0 V, 680 kohm input resistance
ACCURACY AT 25°C
|
REFERENCE
|
INTERNAL
|
EXTERNAL
|
|
Maximum
error
|
±0.01%
of span
|
±0.01%
of span
|
|
±2
counts
|
±2
counts
|
|
|
Zero
tempco
|
±0.5
counts/°C
|
±1
count/°C
|
|
Span
tempco
|
±0.01%
of span/°C
|
±0.005%
of span/°C
|
Full-scale step response: 1.0 s
Warmup to rated accuracy: 10 min
NOISE REJECTION
NMR, SIG HI to SIG LO: 70 dB, 50/60 Hz
CMR, SIG GND to PWR GND: 120 dB, DC to 60 Hz
CMV, SIG GND to PWR GND: 1500 Vp per HV test, 354 Vp per IEC spacing
ANALOG-TO-DIGITAL CONVERSION
Technique: Dual-slope, average value
Signal integration period: 100 ms
Read rate: 2.5/s
DISPLAY
Type: 7-segment, red LED
Height: 0.56 in (14.2 mm)
Symbols: 1.8.8.8.8
Decimal points: Four positions, programmable by jumpers behind lens or at connector, 10 mA sink to DIG GND
Overrange indication: Four least-significant digits flash
DIGITAL INPUTS
Signals: Display hold, blanking, display test, decimal point select
Level: TTL or 5 V CMOS compatible
POWER
AC voltages: 115 or 230 V ac, ±15%
AC frequency: 49 to 440 Hz
DC voltages: 9-32 V dc, isolated to 300 Vp; 26-56 V dc, isolated to 300 Vp
Power consumption: 4.0 W nominal
Output voltages: +4.7 V dc and 4.7 V dc ±5%, 10 mA max
ENVIRONMENTAL
Operating temperature: 0 to 60°C
Storage temperature: 40 to +85°C
Relative humidity: 95% at 40°C (non-condensing)
MECHANICAL
Dimensions: Newport DIN2A (short 1/8 DIN) case (see Mechanical section for drawings)
Weight: 15 oz (425 g)
Case material: 94V-0 UL-rated polycarbonate
Connectors - Power & signal: D4 screw-terminal barrier strip (std)
Display control: D1 36-pin PCB edge connector (opt)
Warmup to rated accuracy: 10 min
NOISE REJECTION
NMR, SIG HI to SIG LO: 70 dB, 50/60 Hz
CMR, SIG GND to PWR GND: 120 dB, DC to 60 Hz
CMV, SIG GND to PWR GND: 1500 Vp per HV test, 354 Vp per IEC spacing
ANALOG-TO-DIGITAL CONVERSION
Technique: Dual-slope, average value
Signal integration period: 100 ms
Read rate: 2.5/s
DISPLAY
Type: 7-segment, red LED
Height: 0.56 in (14.2 mm)
Symbols: 1.8.8.8.8
Decimal points: Four positions, programmable by jumpers behind lens or at connector, 10 mA sink to DIG GND
Overrange indication: Four least-significant digits flash
DIGITAL INPUTS
Signals: Display hold, blanking, display test, decimal point select
Level: TTL or 5 V CMOS compatible
POWER
AC voltages: 115 or 230 V ac, ±15%
AC frequency: 49 to 440 Hz
DC voltages: 9-32 V dc, isolated to 300 Vp; 26-56 V dc, isolated to 300 Vp
Power consumption: 4.0 W nominal
Output voltages: +4.7 V dc and 4.7 V dc ±5%, 10 mA max
ENVIRONMENTAL
Operating temperature: 0 to 60°C
Storage temperature: 40 to +85°C
Relative humidity: 95% at 40°C (non-condensing)
MECHANICAL
Dimensions: Newport DIN2A (short 1/8 DIN) case (see Mechanical section for drawings)
Weight: 15 oz (425 g)
Case material: 94V-0 UL-rated polycarbonate
Connectors - Power & signal: D4 screw-terminal barrier strip (std)
Display control: D1 36-pin PCB edge connector (opt)
Copyright 2003,
NEWPORT Electronics, Inc. All rights reserved.