INFU INFINITY® SERIES UNIVERSAL PANEL METER Specifications 6 Digits NEMA-4 (IP65) Front Bezel Four Isolated Open Collector Outputs Smart Filtering Detects the Difference Between a Spike or Process Change (Patent Applied For) Peak and Valley Detection and Memory Digital Tare 1.5 to 11 or 24 Vdc Sensor Excitation Options Isolated Dual 7 Amp Form C Relays Isolated Parallel BCD Output Isolated Analog Output of 0-10 Vdc, 0-5 Vdc, 1-5 Vdc, 0-20 mA dc and 4-20 mA dc Isolated Serial RS-232 Isolated RS-485, Addressable up to 199 Units

NEWPORT PRODUCT INFO • MANUAL - INFP • QUICK START - INFP • MANUAL - INFS • QUICKSTART - INFS • MANUAL - INFT • QUICK START - INFT - THERMOCOUPLE • QUICK START - INFT - RTD • OPTIONS & ADDENDUMS • SOFTWARE • MECHANICAL • PRICE • REQUIRES ADOBE ACROBAT - HELP

The INFINITY® The INFU universal meter is ideal for those who want a single meter to cover a variety of input needs. This meter can measure a broad spectrum of dc voltage and current ranges, nine thermocouple types, a variety of RTDs, a multitude of inputs from pressure transducers, load cells, strain gages as well as potentiometric inputs. Six full digits make this meter ideal for demanding process control applications. On-board excitation is included so you can power virtually any sensor or transmitter, and four standard setpoints give the flexibility to control or alarm your system completely. The various setpoints can be configured as active above or below, latching or non-latching, as either high deviation, low deviation or band deviation, as well as numerous other possibilities. The meter is delivered configured for the input type you choose. The meter can be easily reconfigured using the front pushbuttons or via either of the optional serial communications boards. All options are field installable, so you can easily upgrade as your needs change. SPECIFICATIONS Accuracy: ±0.005% rdg Span Temperature Coefficient: ±20 ppm Step Response: 1 sec to 99.9% Warmup to Rated Accuracy: 50 min Operating Ambient: 0 to 50°C (32 to 122°F), 95%RH, non-condensing Storage Ambient: -40 to 85°C (-40 to 185°F) Power: 115 or 230 Vac, 49-400 Hz; 10 to 32 Vdc Power Consumption: 6 W nominal, 10 W max. Normal Mode Rejection: 60 dB Common Mode Rejection: 120 dB Common Mode Voltage: 1500 V peak per Hv test Resolution: 17-bit Conversion: dual-slope technique Reading Rate: 3/sec or 13/sec, 60 Hz; 3/sec or 12/sec, 50 Hz Display: red or green 6-digit, 14-segment, 13.7 mm (0.54"); 4 alarm indicators Dimensions: 48 H x 96 W x 165 D mm (1.89" x 3.78" x 6.5") Panel Cutout: 45 H x 92 W mm (1.772" x 3.622"); 1/8 DIN Weight: 574 g (1.27 lb) TTL Outputs: four, isolated open collector; rated 150 mA at 1 V sink, 30 V open BCD Output: isolated, tri-state, TTL/CMOS compatible; external 5 V supply for isolated; internal 5 V supply for non-isolated Dual Relays: form C, 7 A at 30 Vdc or 230 Vac Four Relay Option: dual 7A relays and dual 1 A relays Analog Output: 0-5 V/1-5 V/0-10 V/0-20 mA/4-20 mA, user selectable; 354 Vp isolation; 14-bit resolution; 0.1% accuracy, 50 msec step response RS-232 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ11 4-wire connection; programmable to transmit current display, alarm status, min/max, actual measured input value and status RS-485 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ12 6-wire connection; addressable from 0 to 199 Voltage Input Ranges: 0-100 mV, 0-1 V, 0-5 V, 1-5 V, 0-10 V, 0-100 V, ±50 mV, ±500 mV, ±5 V, ±50 V Current Input Ranges: 0-20 mA, 4-20 mA Input Configuration: single-ended Polarity: unipolar/bipolar, programmable Span Adjustment: +0.00001 to 500,000, programmable Offset Adjustment: 0 to 999,999 or 0 to -99,999, programmable Thermocouple Input Types: J, K, T, E, R, S, B, N, J DIN RTD Input: any 6 to 6k (ohm) NIST or DIN platinum and any linear RTD RTD Connection: 2, 3 or 4-wire Sensor Break Protection: upscale or downscale, programmable Sensor Excitation: 10 V at 30 mA for bridge; 24 V at 25 mA for loop power

	Input Type	Range, °F	Range, °C	Accuracy
	Iron-Constantan	-346 to 1400°F	-210 to 760°C	0.2°C / 0.3°F
	Chromel-Alumel	-454 to 2500°F	-270 to 1372°C	0.2°C / 0.3°F
	Copper-Constantan	-454 to 752°F	-270 to 400°C	0.2°C / 0.3°F
	Chromel-Constantan	-454 to 1832°F	-270 to 1000°C	0.2°C / 0.3°F
	Pt/Rh	-58 to 3214°F	-50 to 1768°C	0.2°C / 0.3°F
	Pt/30% Rh-Pt/6° Rh	+212 to 3300°F	+100 to 1820°C	0.3°C / 0.5°F
	Nicrosil-Nisil	-454 to 2372°F	-270 to 1300°C	0.2°C / 0.3°F
	Iron-Constantan	-328 to 1652°F	-200 to 900°C	0.6°C / 1.0°F

Input Type	Range, °F	Range, °C	Range, °K	Accuracy*
RTD 1 - 10ohm Copper	-328 to 392°F	-200 to 200°C	73.2 to 473.2°K	1.0°C/2.0°F/1.0K
RTD 2 - 0.00385 100ohm Pt	-328 to 1652°F	-200 to 900°C	73.2 to 1173.2°K	0.2°C/0.3°F/0.2K
RTD 3 - 0.00392 100ohm Pt	-328 to 1562°F	-200 to 850°C	73.2 to 1123.2°K	0.2°C/0.3°F/0.2K

NEXT