Model 100W30 - OMEGAFILM® RTD Element

OMEGAFILM® RTD Element - For Fast Response!
Model 100W30

The 100W30 Platinum Resistance Temperature Detector has been developed to provide the typical high quality of platinum RTD sensors at lower cost. The 100W30 is equivalent in size to standard elements, and utilizes a thick film design for long term stability. Compared to standard 3 mm wire wound sensors, the second generation 100W30 has up to 4 times the response time, and is a direct replacement. The type 100 sensor is calibrated to DIN43760, BS1904 and IEC751 specifications, with an alpha coefficient of 0.00385. Nominal resistance is 100 ohms at 0°C. These sensors can be operated at temperatures up to 600°C (1200°F).

Specifications
Sensor Type: Thick film platinum RTD, alpha = 0.00385
Surface Insulation: 1000 M ohm at room temp. and 250 V, or 50 M ohm at 600°C (1110°F) and 50 V
Response Time: Less than 0.1 sec. to reach 63% of ultimate temperature in stirred water (BS 1904 test)
Self Heating Effect: Less than 0.006°C/mw, when immersed in stirred water at ice point
Stability after Temperature Cycling: Less than 0.05% after 10 cycles between -70 and 600°C (-95 and 1110°F)
Temperature Range: -70 to 600°C (-95 to 1110°F)
Fundamental Interval: 38.5 ohms nominal from 0 to 100°C (32 to 212°F)
Dimensions: 25.4 L x 3.2 W x 0.8 mm D (1.0 x 0.126 x 0.031") plus platinum lead wires
0.345 mm (0.0136") dia. x 8.0 mm (0.315") long

All RTD elements available with TAC-welded PFA insulated lead wires. Pricing is dependent on lead style, See page with “RTD Elements with Lead Wires Attatched”.