 |
Retractable Sensor Cables - Color
Coded, Spring Coiled Retractable Cables for Thermocouples, RTD’s and
Thermistors
RSC / RSCM
NEWPORT® Retractable Sensor Cable is color coded and spring coiled, for use with thermocouples, RTD’s and thermistors. To achieve a superior jacket construction, NEWPORT has employed the latest in jacketing material: TPE (thermoplastic elastomer), a unique family of thermoplastics which exhibits characteristics previously found only in rubber compounds. TPE is extremely tough and flexible, and has excellent abrasion resistance. Our special construction technique yields an expansion rate of up to 500%.
NEWPORT’s retractable sensor cables are specifically recommended for use with electronic-type indicators, either panel, handheld or bench type models. The cables should not be used with self powered, unamplified analog meters, such as NEWPORT® Series 7000 pyrometers. Retractable sensor cables have hundreds of applications: oscillating machinery, handheld surface probes, or wherever retractable sensor cables are required.
Color
Code of Cables
Typical Resistance of Cables
How
To Order
1. Fill the 1st box (1) with desired ANSI Calibration. Use ANSI symbols “J”, “K”, “T”, “E” for thermocouple calibration; “RTD” for resistance temperature detector; or “TH” for thermistor.
2. Fill in 2nd box (2) with retracted coil length in feet (1, 2, 3 or 4 feet).
3. Fill in 3rd box (3) with termination style number (one end).
4. Fill in 4th box (4) with termination style number (other end).
(1) Thermocouple Type: J, K, T or E
(2) Retracted Length (Ft.): 1, 2, 3 or 4
(3)Termination Style (End #1)
(4) Termination Style (End #2)
*M = Miniature
Retractable Cable
† Indicate associated meter or pin out desired for connector
Ordering Example: RSC-K-2-1-2 calls for a 2 foot long, Type K retractable sensor cable with spade lugs on one end and a male OST connector on the other $8.50 + 5 + 2 + 5 = $20.50
RSC / RSCM
 |
|
||||||||||||
NEWPORT® Retractable Sensor Cable is color coded and spring coiled, for use with thermocouples, RTD’s and thermistors. To achieve a superior jacket construction, NEWPORT has employed the latest in jacketing material: TPE (thermoplastic elastomer), a unique family of thermoplastics which exhibits characteristics previously found only in rubber compounds. TPE is extremely tough and flexible, and has excellent abrasion resistance. Our special construction technique yields an expansion rate of up to 500%.
NEWPORT’s retractable sensor cables are specifically recommended for use with electronic-type indicators, either panel, handheld or bench type models. The cables should not be used with self powered, unamplified analog meters, such as NEWPORT® Series 7000 pyrometers. Retractable sensor cables have hundreds of applications: oscillating machinery, handheld surface probes, or wherever retractable sensor cables are required.
| Specifications Insulation: TPE (Thermoplastic Elastomer) Calibrations: ANSI type J, K, T, E and 3-wire copper for RTD’s and thermistors Thermocouple Wire Conformity: Standard Limits of Error, per ANSI MC 96.1 (1975) Temperature Rating: –22 to 220°F (–30 to 105°C) Construction: 28 gage stranded wire (7 strand x 36 gage) Length: Coiled lengths of 1, 2, 3, or 4 feet with 6-inch straight ends. Straight wire length per foot of retracted coil = 8.8 feet; maximum expanded length of 1 foot coil = approximately 5 feet Length Tolerance: ±10% Available Terminations (on right side column) Style 0 1 inch Trimmed Ends Standard Style 1 Compensated Spade Lugs Style 4 NEWPORT SMP-M (Male) Style 5 NEWPORT SMP-F (Female) Style 2 NEWPORT OST-M (Male) Style 3 NEWPORT OST-F (Female) Style 6 NEWPORT OTP-F (Female) (RTD & Thermistor) Style 7 NEWPORT OTP-M (Male) (RTD & Thermistor) Style 8† NEWPORT TA3-FL (Female) Style 9† NEWPORT TA3-ML (Male) Style 10 NEWPORT MTP-F (Female) (RTD & Thermistor) Style 11 NEWPORT MTP-M (Male) (RTD & Thermistor) 
|
|
|
ANSI
Code
|
Calibration
|
Jacket
|
+
Wire
|
-
Wire
|
|
J
|
Iron/Constantan
|
Black
|
White
|
Red
|
|
K
|
CHROMEGA®/ALOMEGA®
|
Yellow
|
Yellow
|
Red
|
|
T
|
Coppper/Constantan
|
Blue
|
Blue
|
Red
|
|
E
|
CHROMEGA®/Constantan
|
Purple
|
Purple
|
Red
|
|
T
|
Copper
(3-Wire)
|
White
|
2
Black
|
Red
|
Typical Resistance of Cables
|
Ohms
Per Running Foot of Cable 1 Foot Coiled (5 Feet Extended)
|
Ohms
Per Foot of Wire
(Three Wires Per Cable) |
|||
|
J
|
K
|
T
|
E
|
RTD
and Thermistor
|
|
16.3
|
27.5
|
14.0
|
33.1
|
0.57
|
1. Fill the 1st box (1) with desired ANSI Calibration. Use ANSI symbols “J”, “K”, “T”, “E” for thermocouple calibration; “RTD” for resistance temperature detector; or “TH” for thermistor.
2. Fill in 2nd box (2) with retracted coil length in feet (1, 2, 3 or 4 feet).
3. Fill in 3rd box (3) with termination style number (one end).
4. Fill in 4th box (4) with termination style number (other end).
(1) Thermocouple Type: J, K, T or E
(2) Retracted Length (Ft.): 1, 2, 3 or 4
(3)Termination Style (End #1)
(4) Termination Style (End #2)
|
Model
#
|
Input
Type
|
O.D.
|
Price
1st ft
|
Price
Ea Add'l ft
|
Price
Each Termination Style
|
||||
|
0
|
1
|
2,3,4,5,10,11
|
6,7
|
8,9
|
|||||
|
RSC-(1)-(2)-(3)-(4)
|
T/C
|
0.165"
|
$8.50
|
$5
|
N/C
|
$2
|
$5
|
$7
|
N/A
|
|
RSC-RTD-(2)-(3)-(4)
|
RTD
|
0.175"
|
$7.00
|
$4
|
N/C
|
$5
|
$5
|
$7
|
$6.25
|
|
RSC-TH-(2)-(3)-(4)
|
TH
|
0.175"
|
$7.00
|
$4
|
N/C
|
$5
|
$5
|
$7
|
$6.25
|
|
RSCM*-(1)-(2)-(3)-(4)
|
T/C
|
0.135"
|
$8.50
|
$5
|
N/C
|
$2
|
$5
|
$7
|
N/A
|
† Indicate associated meter or pin out desired for connector
Ordering Example: RSC-K-2-1-2 calls for a 2 foot long, Type K retractable sensor cable with spade lugs on one end and a male OST connector on the other $8.50 + 5 + 2 + 5 = $20.50
Copyright 2003,
NEWPORT Electronics, Inc. All rights reserved.