Navigation image map
Contact Us Distributor Site Map Manuals Home Products


PLATINUM Series Universal Benchtop Digital Controllers
CS8DPT

Benchtop Digital Controllers - PLATINUMTM Series Universal
Universal Inputs: Thermocouple, RTD, Thermistor, Process Voltage/Current, and Strain
Simple to Configure and Use
Optional RS232/485 and Ethernet Communications
High Accuracy
Internal 5A SSR Control Output
5-Year Warranty
Dual Display Standard, Indicates Both Setpoint and Real-Time Process
Auxiliary Output to Drive Higher-Current SSRs
Totally Programmable Color Displays, Standard
Operates from 90 to 240 Vac @ 50/60 Hz

1 Year Warranty New Electromagnetic Compatibility

Scroll Below to Order Specs CS8DPT Quickstarts PT Manuals Software Literature


The NEWPORT® CS8DPt is a portable benchtop digital controller and with a large color-changing display. This benchtop controller features dual LED displays that can be programmed to change color between Green, Amber, and Red at any setpoint or alarm point. Other options include, serial communications, and Ethernet.

This universal temperature and process instrument handles 10 common types of thermocouples, multiple RTDs,thermistors and several process (DC) voltage & current ranges, and strain type of inputs.

Specifications
Accuracy: See table on Spec Sheet for details
Resolution: 1°/0.1°; 10 µV process
Temperature Stability:
    RTD: 0.04°C/°C
    Thermocouple: 25°C (77°F); coldjunction compensation of 0.05°C/°C
    Process: 50 ppm/°C
CMRR: 120 dB
A/D Conversion: Dual-slope
Reading Rate: 20 samples per second
Digital Filter: Programmable
Display: 4-digit, 9-segment LED; Red, Green, and Amber, and programmable colors for process variable, setpoint and temperature units
Input Types: Thermocouple, RTD, thermistor, analog voltage, analog current and strain
Thermocouple Type (ITS 90): J, K, T, E, R, S, B, C, N, L
RTD Input (ITS 68): 100/500/1000 Ohm Pt sensor; 2-, 3- or 4-wire; 0.00385 or 0.00392 curve
Thermistor Input: 2252 Ohm, 5K Ohm, 10K Ohm
Voltage Input: 0 to 100 mV, 0 to 1 Vdc, 0 to 10 Vdc
Input Impedance: 10 MO for 100 mV, 1 MO for 1 or 10 Vdc
Current Input: 0 to 20 mA (5 O load)
Strain Input: 0 to 50, 0 to 100 mV
Configuration: Differential
Polarity: Bipolar
Decimal Selection: None or 0.1 for temperature; None, 0.1, 0.01 or 0.001 for process
Control Output: 5A SSR (internal), 3A relay max, analog process output
Excitation: Firmware selectable to 5, 10, 12, and 24Vdc @ 25mA
Network and Communications
Ethernet: Standards compliance IEEE 802.3 10 Base-T
Supported Protocols: TCP/IP, ARP, HTTPGET
RS232/RS485: Selectable from menu; both ASCII and Modbus protocol selectable from menu; programmable 1200 to 115K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status
Connection: USB, Ethernet (option), Series (option)
General
Power: 90 to 240 Vac, 50 to 60 Hz
Dimensions: 236W x 230D x 108mmH (9.3'x9.1'x4.3')
Weight:1.13kg (2.5lb)

Note: Power cords are available from OMEGA.

Embedded Internet
This NEWPORT benchtop devices can serve Web pages over an Ethernet LAN or even over the Internet, making it possible to monitor and control a process through a Web browser (such as Microsoft Internet Explorer®) from anywhere in the facility or anywhere in the world.

Remote Control
For example, using an CS8DPt Series temperature controller to control a heater, an engineer can monitor the temperature, change setpoints or alarm points, turn the heater on and off, or make other modifications from anywhere on the local network or anywhere on the Internet. The Web pages are easily customized, and secure, password protected access to the devices is easily controlled. And it requires absolutely no special software on the engineer’s computer to view the data and “supervise” the controller— nothing other than a Web browser.

E-Mail and Alarm
In fact, the CS8DPt controller can even send an e-mail to the engineer (or anyone he or she chooses) about an alarm condition or to update the status. Leveraging the technology of the Internet, the engineer could receive a message from the controller on an Internet-enabled pager or cell phone.

Most remarkable is that all this can be accomplished without a computer. The NEWPORT® CS8DPt controller with fully loaded communication options connects directly to the Ethernet network—not to the serial port of a computer functioning as a “server” and “master” to “slave” instruments connected through serial communications. With the loaded C24 option, these devices are also available with RS232 and RS485, and MODBUS serial communications.



Product Selection (Specify Model Number)
 Part Number   Availability   Price    Description   
 CS8DPT in-stock    $595.00     Benchtop controller, universal input (TC, RTD, PV, Strain)  
 CS8DPT-C24-EIP-A in-stock    $775.00     Benchtop controller with embedded Ethernet and RS485 serial, and isolated analog  
 Power Cord Option
 Power Cord-Molded in-stock    $7.35     Power cord with connector for North America (US, Mexico, Canada), Standard 120 Vac  
 Power Cord-DM in-stock    $21.25     Power cord with connector for Denmark  
 Power Cord-E-10A in-stock    $21.25     Power cord with connector for Continental Europe  
 Power Cord-IT in-stock    $21.25     Power cord with connector for Italy or Ireland  
 Power Cord-SE in-stock    $7.35     Power cord with stripped ends (no connection), all countries 250 Vac max  
 Power Cord-UK in-stock    $36.75     Power cord with connector for United Kingdom  
 
All dollar amounts on this site are shown in US currency.

 Note: Comes complete with 2 output cords, wire kit (RTD & Bridge Inputs only) and quick start manual.
Please select the power cord from the accessories list.

   
Keywords: Bechtop Controller, Temperature Controller, Universal Input Benchtop Device, Digital Controllers, Embedded Ethernet Connectivity

   Back to top