Navigation image map
Contact Us Distributor Site Map Manuals Home Products


Programmable Signal Conditioners/Transmitters
iDRN-ACC, iDRN-ACV, iDRX-ACC, iDRX-ACV

Signal Conditioners and Transmitters
Software Selectable Input Ranges
iDRX-ACV: 0-400 mV to 0 to 400 Vac
iDRX-ACC: 0-10 mA to 0-5 A ac
14-Bit Resolution (max)
0.2% FS Accuracy
1800 V Isolation
Free Setup and Configuration Software
Factory Setup and Configuration Available at No Charge (for iDRN Analog Output models)


1 Year Warranty
Electromagnetic Compatibility



 


The iDRN and iDRX Series signal conditioners provide highly accurate, stable and isolated measurement of AC voltage and current signals across extremely wide ranges: AC Current ranges from 0 to 10 mA through 0 to 5 A ac; AC Voltage ranges from 0 to 400 mV to 0 to 400 Vac.

ANALOG or DIGITAL OUTPUTS
The iDRN-ACV and iDRN-ACC accept ac voltage and ac current respectively and provide an analog output which is proportional to the input. The iDRX-ACV and iDRX-ACC accept ac voltage and ac current respectively and transmit via RS-485 Serial Communications.

ANALOG OUTPUT MODEL
The Analog Output models can be configured for outputs of 0 to 10 Vdc, 4 to 20 mA or 0 to 20 mA with the free configuration software. The modules connect to a PC with RS-232 Serial Communications, or by Ethernet with the optional EIT-D module. Once configured the settings are stored in non-volatile memory and the unit can be disconnected from the PC.

DIGITAL OUTPUT MODEL
The iDRX-ACC (Current) and iDRX-ACV (Voltage) communicate via RS-485 Serial Communications using either simple NEWPORT® ASCII Commands or the popular MODBUS Protocol. Up to 32 modules may be connected to a single RS-485 port stretching up to 4,000 ft., more with RS-485 repeaters.

ETHERNET CONNECTION
The Optional EIT-D iServer module can connect up to thirty-two (32) iDRX RS-485 Signal Conditioners to an Ethernet network and the Internet using standard TCP/IP protocol. The iServer can also be used as a simple Serial to Ethernet "bridge" or converter to connect a single iDRN RS-232 device to an Ethernet network and the Internet.

Factory Setup and Configuration at No Extra Charge
To make your installation even easier, your iDRN (Analog Output and RS-232) signal conditioners can be ordered preconfigured by the factory at no extra charge. You select the input types, ranges and output scale and we will program the instruments to your specific requirements in our calibration lab prior to shipment. For custom factory setup and scaling of the iDRN model, please specify the “-FS” option.

Please Specify:
iDRN-ACV: Input Value High & Low
Output Value High & Low
Example: 0 volts = 4 mA, 400Vac = 20 mA
iDRN-ACC: Input Value High & Low
Output Value High & Low
Example: 0 A = 4 mA, 5 A = 20 mA

Free Active X Controls
Free Active X Controls are provided for the iDRN/iDRX series Signal Conditioners. This free software makes it easy to integrate the "iDRN/iDRX Signal Conditioners" with "Active X Containers" such as Microsoft Visual Basic as well as with popular OLE compliant data acquisition, process control, and industrial automation software from NEWPORT® as well as Wonderware, Intellution, Rockwell Automation, and Object Automation among others.


SPECIFICATIONS
Accuracy at 25°C: ±0.2% FS
Resolution: 10 to 14 bit
Power Consumption: 2.4 W; 100 mA @ 24 Vdc

Model iDRX-ACV/ iDRN-ACV
Input Ranges: 0 to 400 mV to 0 to 400 Vac full scale
Interface: RS-485; RJ-12 or screw terminal connector

Model iDRX-ACC/ iDRN-ACC
Input Ranges: 0 to 10 mA to 0 to 5 A ac full scale
iDRX Output: 2-wire (half duplex) RS-485 (
NEWPORT® ASCII Serial Protocol and MODBUS Serial Protocol)
iDRN Output: 0 to 10V @ 10 mA max; 0 to 20 mA or 4 to 20 mA

ACV Default settings iDRN: Input 0-400 VAC; Output 4-20 mA (Custom Settings available at no charge.)
ACC Default settings iDRN: Input 0-5 Amp; Output 4-20 mA (Custom Settings available at no charge.)





Product Selection (Specify Model Number, see variations below in partnumber builder table)
 Part Number   Availability   Price    Description   
 iDRX-ACC in-stock    $285.00     Digital signal conditioner with RS-485 output for ac current input  
 iDRX-ACV in-stock    $285.00     Digital signal conditioner with RS-485 output for ac voltage input  
 iDRN-ACC in-stock    $305.00     Signal conditioner with analog output for ac current inputs  
 iDRN-ACV in-stock    $305.00     Signal conditioner with analog output for ac voltage inputs  
 ACCESSORIES
 CAT-285 in-stock    $193.00     Bi-directional RS-232-RS-485 converter for iDRX series  
 DB9-RJ12 in-stock    $31.50     DB9*TO RJ12 Connector Adaptor includes 7 ft RJ12 Cord  
 DB25-RJ12 in-stock    $31.50     DB25 to RJ12 Connector Adaptor includes 7 ft RJ12 Cord  
 EIT-D in-stock    $205.00     Serial to Ethernet iServer industrial MicroServer with screw terminal serial port, servers 32 devices  
 iDRN-PS-1000 in-stock    $158.00     Switching Power supply, 95-240 Vac input, 24 Vdc output @850mA  
 RAIL-35-2 in-stock    $19.50     35 mm (1.4") DIN rail, 2 m (6.6') length  
 -FS     Consult sales   Factory setup and scaling (No Charge)  
 SOFTWARE
 OPC-SERVER LICENSE in-stock    $315.00     OPC Server Software License  
 
All dollar amounts on this site are shown in US currency.

 Ordering Example: (1) iDRX-ACV  Digital signal conditioner with RS-485 output for ac voltage inputs = $285
 Part Number Builder
(1) (2)
i
i
D
D
R
R
-
-
Option Descriptions
(1) Output Signal
  Select
N for ANALOG OUTPUT
X for DIGITAL RS485 OUTPUT
(2) Input Signal
  Select
PR for PROCESS VOLTAGE OR CURRENT
ST for STRAIN GAGE/BRIDGE OR MILLIVOLT
TC for THERMOCOUPLE INPUT
RTD for RTD INPUT
ACV for AC VOLTAGE INPUT
ACC for AC CURRENT INPUT
FP for FREQUENCY/PULSE INPUT
 NOTE: All combinations may not be valid, check spec sheet for valid part numbers.


   
Keywords: Programmable Signal Conditioner/Transmitters, Signal Converter, DIN Rail, 4-20 mA transmitter, iDRN-ACC, iDRN-ACV, iDRX-ACC, iDRX-ACV

   Back to top