Digital RTD Thermometer with NEMA 4 Enclosure DTG-RTD100
Large Backlit Display with 25 mm (1 in) Digits Readable From Over 10.7 m (35 ft)
NEMA 4 Rated 316 SS Enclosure
Up to ±0.2°C (0.3°F) or ±0.1% Rdg Accuracy
Connects Directly to 3-Wire Pt100 RTD Sensors
User Scaleable 4 to 20 mA, 0 to 5 or 0 to 10 Vdc Analog Output Standard
Powered by Internal Battery or External DC Power Supply
Included Setup and Service Software Allows for Fast Maintenance and Calibration via USB Connection
Wireless Transmitter Option Sends Readings to Remote Locations and Allows for PC-Based Chart Recording and Data Logging
Low Power Operation and Sleep Mode for Long Battery Life
NEWPORT’s new DTG-RTD100 Thermometer Series features a rugged 316 SS enclosure that is designed specifically for washdown, sanitary and marine applications.
The large backlit LCD display incorporates both large 25 mm (1in) digits and a 25 segment bar graph that make reading at distances up to 10.7 m (35ft) easy.
Models are available with or without integral standard or sanitary sensors. Standard features include: internal battery external DC power supply operation,
analog output and user programmable alarms. The wireless transmitter option allows for remote monitoring, chart recording and data logging.
A variety of userconfigurable options and settings include: update rate, dampening, units, backlight, and auto-off.
SPECIFICATIONS Range: -51 to 538°C (-60 to 1000°F) Accuracy: ±0.2°C (±0.3°F) or ±0.1% of reading Resolution: 0.1°C (0.1°F) Operating Environment: -40 to 70°C (-40 to 158°F); 5 to 100% RH non-condensing RTD Probe/Sensor Input: Pt100, 3-wire Display Type: LCD with selectable backlight Display Digits: 4 digits, 9999 counts Character Height: 25.4 mm (1.0 in) Computer Interface: USB (one programming cable included) Sample/Display Rate: User adjustable from 0.375 to 30 sec, preset to 1/sec Power: Two 3.6V lithium, 4.8 Ah capacity (C cell) included; 12 to 24 Vdc Battery Life (Typical): 1.5 years(without wireless option) Analog Output: User selectable 0 to 5 Vdc, 0 to 10 Vdc, or 4 to 20 mA; Requires external 12 to 24 Vdc power supply for operation Enclosure: 316 Stainless Steel housing, ABS center gasket Enclosure Finish: Electropolished Enclosure Rating: Weatherproof, NEMA 4 (IP65) Settings (USB/Software) Auto-Off: Locked-on, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min, 60 min Update Rate: 10x/s, 5x/s, 2x/s, 1x/s Units: °F, °C, °K, °R Lock: Allows for front button lock-out Alarms: User selectable high and low alarm limits Analog Output: User selectable scaling Backlight: On/off, or 10 sec, 30 sec, 1 min, 5 min
Wireless Transmitter (Optional): Channel number, transmission rate, alarms, sensor offset, chart recording, data logging Calibrate: Zero and span
WIRELESS SPECIFICATIONS Transmit Sample Rate: User programmable from 1 sample/2 min to 1 sample/every 2 sec Radio Frequency (RF) Transceiver Carrier: ISM 2.4 GHz RF Output Power: 10 dBm (10 mW) Range of RF Link: Outdoor Line of Sight: Up to 120 m (400 ft) Indoor/Urban: Up to 40 m (130 ft) Software (Included Free): Requires Windows® 2000, XP or Vista (32 bit) Internal Battery: Two 3.6V lithium, 8.4 Ah capacity (C cell) included Data Transmitted to Host: Temperature reading, ambient temperature reading, RF transmit strength and battery level
† All dollar amounts on this site are shown in US currency.
Keywords: Digital RTD Thermometer with NEMA 4 Enclosure with Integral or Remote Sensors DTG-RTD