PADDLEWHEEL FLOW SENSOR SYSTEM

Insertion Paddlewheel Flow Sensors

FP7001A
	Measures Both Flow and Temperature Simultaneously
	Very Economical
	Wide Chemical Compatibility
	High Level Pulse Output for Flow—No Amplifier Needed
	10mV/°C Analog Temperature Output

The NEWPORT FP7001A paddlewheel flow and temperature sensor is ideal for accurate monitoring of typical industrial water flows, hard-to-handle corrosive aqueous solutions, and high purity fluids . The FP7001A utilizes a paddlewheel-like rotor whose motion is converted into a high-level square wave pulse output by an open collector Hall effect sensor. Pulse amplitudes from 5 to 18 V are possible, depending on input power. The FPW-15 120 Vac converter plugs directly into a wall socket and outputs a regulated 15 Vdc at 400 mA.

NEWPORT PRODUCT INFO

• MANUAL - PDF Version

• SPECS - PDF

• PRICE

•

REQUIRES ADOBE ACROBAT - HELP

The INFCTRA Series panel meter supplies power for the flow sensor and provides rate indication, or totalization, and batch control (when ordered with the dual relay option). When ordered with the analog output option, the INFCTRA can be used to interface the FP7001A flow signal to such items as strip chart recorders, dataloggers, and computer interfaces.
The system consists of the flow sensor, an installing fitting, and electronics. The PVC tee fittings are supplied with a PVC locking nut, and the galvanized iron tee fittings are supplied with a brass locking nut to provide a secure metal-to-metal mounting to the threaded brass insert.

The FP7001A is not compatible with FP-5300 or FMG-5300 Series installation fittings. When powered by the FPW-5 five Vdc wall socket converter, the FP7001A has a TTL level pulse output which can be used with a variety of pulse input flow indicators, signal conditioners and controllers. It is not compatible with the FPM 730/740.

INFCTRA Series compatible indicators, for flowrate, or total or batch control, sold separately.

Availble with PVC or galvanized iron fittings

Available with PVC or galvanized iron fittings

SPECIFICATIONS
Accuracy: ±2% of full scale
Repeatability: ±1% of full scale
Power: 5 to 18 Vdc @ 10 mA maximum

Wetted Materials
FP7001A Series sensor
polypropylene body, PVDF paddle, FKM O-ring, 316SS shaft. Galvanized iron tee includes brass insert and locking nut. PVC tee has PVC insert and locking nut.

Fluid Temperature/Pressure Range
Do not exceed the maximum ratings of your piping. Depending on the material of the fitting, the operating temperature/pressure may be limited by your piping and not by the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C (100°F), 60 psig @ 49°C (120°F) 30 psig @ 60°C (140°F), due to the insert in the tee. FP7001A sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max. pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig max

Frequency Output: Nominal 1 Hz/fps. amplitude of open collector pulse = Vdc input power

Cable Length: 2.4 m (8 feet)

Weight
0.2 kg (1/2 lb); FP7030 fitting: 4.3 kg (9.5 lb); FP7030-GI fitting: 2.8 kg (6.25 lb)

Max Viscosity: 5 cps

TEMPERATURE SENSOR SPECIFICATIONS
Range: 2 to 150°C (36 to 302°F)

Accuracy: ±1°C

Output: 10 mV/°C

Power: 5 to 18 Vdc