|
PADDLEWHEEL
FLOW & TEMPERATURE
SENSOR / TRANSMITTER SYSTEM
FP7002
|
 |
Measures Both Flow and Temperature |
|
4-20 mA or 1-5 Vdc Field Selectable Output |
|
Wide Chemical Compatibility |
|
NEMA-4 Housing |
|
Compact Industrial Design Design Includes Both Paddlewheel Flow Sensor/Transmitter and Temperature Sensor/ Transmitter in One Assembly |
|
Factory Calibrated-Easy to Install |
|
 |
NEWPORT’s new FP7002 Series Paddlewheel Flow and Temperature Sensor/Transmitter system provides a low cost, factory calibrated, simple, and easy to install solutionfor applications requiring a remote long distance flow and temperature sensor located away from the main indicating meter or control instrumentation. When ordered with an NEWPORT ® installation fitting, the sensor/transmitter is factory calibrated to match the flow rate of the fitting selected. Example: if you ordered an FP7002 sensor/transmitter with an FP7010 PVC fitting, the analog output of the transmitter will be factory calibrated to give 20 mA output at the max flow rate of 50 GPM and 4 mA out at 0 GPM. The analog output can be converted to 1 to 5 Vdc output in the field without recalibrating the system. Also now included into the FP7002 design at no extra charge is an independent temperature sensor/ transmitter with an industry standard 2-wire, 4 to 20 mA loop output scaled over a 0 to 100°C (32 to 212°F) temperature range. |
PADDLEWHEEL OUTPUT SPECIFICATIONS
Accuracy: ±2% of full scale
Repeatability: ±1% of full scale
Power: 12 to 18 Vdc @ 50 mA maximum
Output: 3-Wire 4 to 20 mA (1 to 5 Vdc with external 250 ohm resistor)
Max Loop Resistance: Ohms = (V supply -12 V) /.02 A
FP7002 Wetted Materials:
Sensor Body: Polypropylene
O-Ring: FKM
Paddle: PVDF
Locking Nut: PVC
FP7002A Wetted Materials:
Sensor Body: Polypropylene
O-Ring: FKM
Paddle: PVDF
Locking Nut: Brass
Fluid Temperature/Pressure Range:
Do not exceed maximum ratings of your piping.
Depending on the material of the fitting, the operating temperature/ pressure may be limited by your piping and not by the sensor.
For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C (100°F), 60 psig @ 49°C (120°F) or 30 psig @ 60°C (140°F), due to the insert in the tee.
FP7000 sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig max.
|
Model FP7002A Paddlewheel Flow and Temperature Sensor/Transmitter, $385, Shown Mounted in the FP7010-GI Galvanized Iron Tee Fitting, $110. |
Weight:
FP7001: 0.2 kg (0.5 lb)
FP7030GI: 2.8 kg (6.25 LB)
FP7030: 4.3 kg (9.5 LB)
Max Viscosity: 5 cps
TEMPERATURE OUTPUT SPECIFICATIONS
Temperature Range: 0 to 100°C (32 to 212°F)
Accuracy: ±1.7°C (3.1°F)
Power: 12 to 18 Vdc @ 30 mA
Output: 2-Wire 4 to 20 mA (1 to 5 Vdc with external 250 ohm resistor)
Max Loop Resistance: Ohms = (V supply -12 V) /.02 A
|
Connect your FP7002 Transmitter to NEWPORT's iSeries Meters with Embedded Internet and Monitor your Process from Anywhere via the Internet!
Model FP7002 Paddlewheel Flow and Temperature Sensor/Transmitter, $365, Shown Mounted in the FP7007 PVC Fitting, $77; Connected to Panel Meter i800-EI $295 |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
|
|
|
|
|
|
|
Back to top |
|
|
