Integral
Handle Probes with Custom Measurement Tips
HPS
*Rated temperature is dependent on
thermocouple type, sheath diameter and environment.
Penetration
Probe
HPS-NP-[*]-316G-12
|
3/16"
O.D.
|
$45
|
45 |
Fast
Response Probe
HPS-RT-[*]-18G-12
|
Reduced to
1/18" OD
|
$50
|
Tip
designed for easy penetration into soft and semi-frozen objects.
Made from rugged 304 stainless steel. Tip rated to 900°C (1650°F).
|
Special
small diameter (1/16") tip designed for fast response. Made from
304 stainless steel. Tip rated to 900°C (1600°F). |
Flexible
Tip Surface Probe
HPS-FSP-[*]-14E-12
|
1/4"
OD
|
$75
|
45 |
Air
Probe
HPS-AP-[*]-316E-12
|
3/16"
OD
|
$85
|
Flexible
tip which conforms to most surfaces for fast, repeatable, accurate
measurements. Made from RTV silicone rubber for good thermal
contact. Tip rated to 260°C (500°F). Warning: Subjecting
sensor tip to temperatures above 60°F will result in damage
to tip.
|
Radiant
energy shield with fine- gage wire thermocouple and 304 stainless
steel sheath. Thermocouple tip is exposed to air flow for fast
measurements, and the constant diameter design facilitates easy
insertion into duct work, grilles and air vents. Tip rated to
870°C (1650°F)
|
*Insert
thermocouple type J, K, T, or E
 |
Made
from the same material as professional football helmets, these
rugged probe handles have endurance designed in to provide long
life.
Custom
Assemblies Available
Thermocouple
probes with integral high impact plastic handles, with 1 ft.
retractable cord with stripped leads (other terminations are
available). Handles are rated to 70°C (160°F). Probes
shown are available in J, K, T and E calibrations. Other sheath
and lead lengths are available. Consult Sales Department for
details. |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Other lengths and diameters are also available. Consult Custom Engineering for details.
Ordering Example: (1) HPS-RT-K-18G-12 reduced tip fast response probe, type K, integral handle style = $50
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
 |
|
|
|
|
Option Descriptions
|
|
(1)
|
Handle Type
|
| |
Select
QD for Quick Disconnect
HPS for Integral Handle
|
(2)
|
Probe Type
|
| |
Select
NP for Penetration Probe
FSP for Flexible Tip Surface Probe
RT for Fast Response Probe
AP for Air Probe
|
(3)
|
Calibration Type
|
| |
Select
J for Type J
K for Type K
E for Type E
T for Type T
|
(4)
|
Sheath Diameter
|
| |
Select
316 for 3/16 Inch for NP & AP
14 for 1/4 Inch for FSP
18 for 1/8 Inch for RT
|
(5)
|
Thermocouple Junction
|
| |
Select
G for Grounded for NP & RT
E for Exposed for FSP & AP
|
| NOTE: All combinations may not be valid, check spec sheet for valid part numbers. |
| | | |
|
|
 |
|
|
|
|
Back to top |
|
|