Hypodermic and Mini Hypodermic Probes - Thermocouple and RTD Elements

Hypodermic and Mini Hypodermic Probes - Thermocouple and RTD Elements
HYP0 / HYP1 / HYP2 / HYP3 / HYP4

NEWPORT® Hypodermic Needle Temperature Probes are designed for industrial, laboratory, manufacturing and chemical research applications. Five probe types are available, with diameters from 0.2 mm (0.008") to 1.65 mm (0.065"). The HYP0, HYP1 and HYP2 have type T (Copper-Constantan) thermocouple elements, while the HYP3 is available in J, K, T or E calibration, and the HYP4 has a 100 Ω Pt RTD (α = 0.00385).

The HYP0 is a mini-hypodermic probe, with 0.2 mm (0.008") diameter. The HYP1 has an O.D. of 0.3 mm (0.012"), and has an added feature of being steam autoclavable to temperatures up to 160°C (325°F). The HYP3 and 4 are industrial probes, with thermocouple and RTD elements respectively.

The HYP0 Mini Hypodermic probe with a needle diameter of only 0.2 mm (0.008") is the least likely to disturb the surrounding insertion area. Binocular microscope micro-manufacturing techniques result in an extremely small type T (Copper-Constantan) thermocouple being implanted in a 33 gage, 25 mm (1") long stainless steel hypodermic needle. The HYP0 has the fastest response of the hypodermic probes, and has a continuous temperature rating of 200°C (400°)F. It has 1.5 m (5') long PFA coated, 36 AWG leads with an SMP type subminiature connector.

Thermocouple Probe Model HYP1
NEWPORT® Research, autoclavable probe is designed to give instant readings in plants, other semi-solids and liquids. A 30 gauge x 13mm (0.5") needle provides this very fast response. The measurable temperature range is cryogenic to 200°C (400°F). This is a type “T” (Copper-Constantan) grounded-junction probe with PFA insulated extension wire and a subminiature male connector termination. The entire assembly is steam autoclavable to a temperature of 160°C (325°F). All probes have 1.5 m (5') leads.

These probes should not be used for human implantation

Thermocouple Probe Model HYP2
The HYP2 Probes have Natural Science, Industrial and Food Processing uses. This assembly comes complete with a type “T” (Copper-Constantan) element, 1.2 m (4') PFA insulated lead wires, and uses a standard (21 gage) hypodermic needle 38 mm (1.5") long. 1.2 m (4') lead wire is standard. Standard size male connector terminates the lead wire.

These probes should not be used for human implantation

Thermocouple Probe Model HYP3
NEWPORT® Industrial Hypodermic Probe uses a sixteen 16 gage x 38 mm (1.5") long needle and may contain J, K, T, E calibrations; they may have a grounded or ungrounded junction, and come with stainless steel overbraided extension wire. The stainless steel overbraiding adds flexibility and extends the probe life. These probes are not autoclavable. They are designed for heavy-duty service. 1.2 m (4') lead wire is standard. Maximum tip temperature is 200°C (400°F).

These probes should not be used for human implantation

Calibrations
J =	K =	T =	E =
Iron-Constantan	CHROMEGA®-ALOMEGA®	Copper Constantan	CHROMEGA®-Constantan

RTD Probe Model HYP4
The RTD Hypodermic Probes are offered for Industrial, Natural Sciences and Food Processing use. These probes contain a 100 Ω platinum RTD (α = 0.00385) within a 16 gage x 38 mm (1.5") hypodermic needle, and come with 1.2 m (4') PFA insulated lead wire.

These probes should not be used for human implantation

All probes were designed for industrial, laboratory, manufacturing and chemical research only. They are not intended for medicinal use, or on humans. Newport Electronics, Inc. assumes no responsibility if these products are used for medicinal purposes, or on humans, or are misused in any way.