Navigation image map
Contact Us Distributor Site Map Manuals Home Products


iSeries 1/16 DIN Temperature, Process and Strain PID Controllers
i16 / iS16 Series

Temperature PID Controller, 1/16 DIN
Universal Inputs
High Accuracy: 0.5°C (±0.9°F), 0.03% Reading
Totally Programmable Color Displays (Visual Alarms)
User-Friendly, Simple to Configure
Free Software
Full Autotune PID Control
Embedded Ethernet Connectivity Optional
RS232 and RS485 Serial Communications Optional
Built-In Excitation
2 Control or Alarm Outputs Optional: DC Pulse, Solid State Relays, Mechanical Relays, Analog Voltage and Current
Output 3: Isolated Analog Voltage and Current Optional
NEMA 4 (IP65) Front Bezel
Temperature Stability ±0.04°C/°C RTD and ±0.05°C/°C Thermocouple @ 25°C (77°F)
Front Removable and Plug Connectors
AC or DC Powered Units
Ratiometric Mode for Strain Gages
Programmable Digital Filter


1 Year Warranty Electromagnetic Compatibility FM Approved for Temp Units Underwriter Laboratories

Scroll Below to Order Specs Manuals Software Mechanical

The NEWPORT® i16 is the popular 1/16 DIN size (48 mm2) controller. It is available with a single (model i16) or dual display (model i16D) that displays a setpoint along with the process value.

The i16 comes standard with your choice of 2 control or alarm outputs in almost any combination: solid state relays rated at 0.5 A @ 120/240 Vac; Form "C" SPDT relays rated at 3 A @ 120/240 Vac; pulsed 10 Vdc output for use with an external SSR; or analog output (0 to 10 Vdc or 0 to 20 mA) selectable for control or retransmission of the process value.

The universal temperature and process instrument offer a selection of 10 thermocouple types as well as 2-, 3- or 4-wire RTDs, process voltage and current. The i16 controller is ideal for use with transmitters and amplified transducers. Built-in excitation is standard (24 Vdc @ 25 mA). The units handle 0 to 20 mA process current and process voltage in 3 scales: 0 to 100 mV, 0 to 1V, and 0 to 10V.

The i16 display can be programmed to change color between GREEN, AMBER, or RED at any setpoint or alarm point.

The strain/process instrument (model iS) meters and controllers measure inputs from load cells, pressure transducers, and most any strain gage sensor. Input ranges include 0 to 100 mVdc; -100 mVdc to 1 Vdc; 0 to 10 Vdc in addition to 0 to 20 mA. Excitation for transducers of 5 V and 10 V is standard.


The i16 is the first 1/16 DIN controller with the option of both RS232 and RS485 in 1 instrument with both MODBUS® serial protocol and the straightforward Newport® ASCII protocol. And of course the i16 is the first 1/16 DIN controller that can connect directly to an Ethernet network and features an embedded Web server. Newport® provides free configuration and data acquisition software downloaded off of the Web.

The i16 enclosure has a NEMA 4 (IP65) rated front bezel and the electronics are removable from the front panel.

For more information on iSeries click here



Product Selection (Specify Model Number, see variations below in partnumber builder table)
 Part Number   Availability   Price    Description   
 i1600 in-stock    $201.00     1/16 DIN Temp Meter with Single Display, No Output, standard power  
 iS1600 in-stock    $245.00     1/16 DIN Strain Meter with Single Display, No Output, standard power  
 i1600-DC in-stock    $230.00     1/16 DIN Temp Meter with Single Display, No Output, low power option: 12-36 Vdc, 24Vac  
 i1622-C24 in-stock    $325.00     1/16 DIN Temp Meter with Single Display, Two Solid State Relays, Isolated RS232 and RS485, standard power  
 i16D33-EIT in-stock    $350.00     1/16 DIN Temp Meter with Dual Display, Two SPDT Relays, Ethernet with embedded web server, standard power  
 i16D22-C24 in-stock    $350.00     1/16 DIN Temp Meter with Dual Display, Two Solid State Relays, Isolated RS232 and RS485, standard power  
 i16D53-EIT in-stock    $350.00     1/16 DIN Temp Meter with Dual Display, Analog Output and SPDT Relay, Ethernet with embedded web server, standard power  
 i16A33 in-stock    $330.00     1/16 DIN Temp Meter with Isolated Linear Analog Output, 2 Relays - Form C SPDT, standard power  
 i1633-AL in-stock    $260.00     1/16 DIN Temp Meter with Single Display, 2 Relays - Form C SPDT, Limit Alarm Version (Alarm Menu, No PID Control, standard power  
 i1653 in-stock    $260.00     1/16 DIN Temp Meter with Single Display, Analog output and Relay, standard power  
 Factory Setup
 ,FS     Consult sales   Factory Setup and Configuration, $50 Charge  
 
All dollar amounts on this site are shown in US currency.

 Note: Comes with complete operator’s manual.

1. Ethernet options are available for the i16D and iS16D controllers only.
2. "-DC", "-C24", and "-C4EIT" not available with excitation.
3. Analog output (option 5) is not available with "-AL" units or i16A models.
4. 20 to 36 Vdc for i16D, i16D-C4EIT, i16D-EIT and i16A
5. "-SM" option not available on iS16 or i16A models.
6. Ethernet options are not available for i16A models.
7. For i16Axx-AL: One alarm and one analog retransmission.


 Ordering Example: (1) i1633 temperature/process controller, output 1 relay, output 2 relay single display, 90 to 240 Vac power, (1) iS1643 strain/process controller, output 1 DC pulse, output 2 relay, single display, 90 to 240 Vac power = $560
 Part Number Builder
(1) (2) (3) (4) (5) (6)
Option Descriptions
(1) Input Type
  Select
i16 for 1/16 DIN Temp Meter with Single Display
i16D for 1/16 DIN Temp Meter with Dual Display
iS16 for 1/16 DIN Strain Meter with Single Display
iS16D for 1/16 DIN Strain Meter with Dual Display
i16A for 1/16 DIN Temp Meter with Isolated linear analog output (note - Analog output (option 5) and Ethernet options are not available for this i16A controller)
(2) Control Outputs
  Select
00 for No Output
22 for Two Solid State Relays
23 for One Solid State Relay and Form C SPDT
24 for 1 SSR and Pulse 10V dc
33 for 2 Relays - Form C SPDT
42 for Pulsed 10 V dc and SSR Relay
43 for Pulsed 10 V dc and Form C Relay
44 for 2 Pulsed 10 V dc
52 for Analog Output and SSR
53 for Analog output and Relay
54 for Analog output and pulse
(3) Network Options
  Select
Nothing(leave field blank) for no Network Option
-C24 for Isolated RS232 and RS485, 300 to 19.2K baud
-EIT for Ethernet with Embedded Web Server
-C4EIT for Ethernet with Embedded Web Server + Isolated RS485/422
(4) Power Supply
  Select
Nothing(leave field blank) for Standard Power input 90 to 240 Vac, 50 to 400 Hz, 110 to 375 Vdc equivalent voltage
-DC for Low Power Option 12 to 36 Vdc/24Vac or 20 to 36 Vdc/24 Vac for dual display units
(5) Menu Options
  Select
Nothing(leave field blank) for no option
-AL for for Limit Alarm Version (Alarm Menu, No PID Control)
-SM for for Simplified Menu Version (ON/OFF Control, No PID Control)
(6) Factory Setup
  Select
Nothing(leave field blank) for no option
,FS for Factory Setup and Configuration
 NOTE: All combinations may not be valid, check spec sheet for valid part numbers.


   
Keywords: i-Series 1/16 DIN Programmable Temperature, Strain / Process Controllers, with RS232 RS485 Communication, controller, PID temperature controller, tehrmocouple controller, digital PID Controllers, digital controller, digital indicator, digital panel meter, embedded web server, p & id, process instrumentation, heater controller, process meter, p&id, thermocouple controller

   Back to top