|
|
|
|
The NEWPORT® i32 is the iSeries
controller in the extremely compact
and increasingly popular 1/32 DIN size
(22.5 x 45 mm cutout). The i32 is
the most sophisticated and accurate
instrument available in the small
1/32 DIN package, yet is still easy
to configure.
The i32 handles more
thermocouple, RTD, process
voltage and current inputs than
any other 1/32 DIN controller.
The i32 is the first 1/32 DIN
controller with built-in excitation
for transmitters or other devices,
24 Vdc @ 25 mA.
The iS32 has built-in excitation
for bridge transducers, 5 Vdc @
40 mA or 10 Vdc @ 60 mA. When
communications options are
installed, external excitation may
be used and ratiometric operation
maintained by connecting the
external excitation to the sense
leads. Both 4- or 6-wire bridge
configurations are supported for
internal or external excitation.
Non-ratiometric operation is supported
for voltage and current transducers
and is also valuable in measuring
offset and millivolt output of bridge
devices during manufacturing and
calibration. This model also features
10-point linearization which allows
the user to linearize the signal
input from extremely nonlinear
transducers of all kinds.
The i32 introduces a number of
unique features not yet found on any
other 1/32 DIN instrument. The i32
is the first 1/32 DIN controller with a
totally programmable display that
can change color between GREEN, AMBER, or RED at any setpoint
or alarm point. The unique 9-segment
LED characters greatly improves
alphanumeric representations.
The i32 is the first 1/32 DIN
controller offering 2 SPDT Form C
relays, instead of the single throw
relays on typical 1/32 DIN controllers.
The i32 is the first to offer
both RS232 and RS422/485 serial
communications in 1 instrument
(C24 option). Both ASCII protocol
and modbus protocol are selectable
from the menu.
For more information on iSeries click here
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes with complete operator’s manual.
1. Excitation not available with "-DC" or "-C24" option.
2. "-AL" option not available on models with analog (option 5) output.
3. "-SM" option not available on iS strain/ process input models.
Ordering Example: (1) i3222-C24 1/32 DIN PID controller with 2 solid-state relays for PID control and serial communications, both RS232 and RS485, (1) iS3222-AL 1/32 DIN strain/process controller, limit alarm version with SSR output = $490
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
 |
|
|
|
|
Option Descriptions
|
|
(1)
|
Input Type
|
| |
Select
i32 for 1/32 DIN Temp/Process Controller
iS32 for 1/32 DIN Strain/Process Controller
|
(2)
|
Control Outputs
|
| |
Select
00 for No Output
22 for Two Solid State Relays
23 for One Solid State Relay and one SPDT Relay
24 for One Solid State Relay and one Pulsed Driver
33 for Two SPDT Relays
42 for One Pulsed Driver and one Solid State Relay
43 for One Pulsed Driver one SPDT Relay
44 for Two Pulsed Drivers
52 for One Analog Output and one Solid State Relay
53 for One Analog Output and one SPDT Relay
54 for One Analog Output and one Pulsed Driver
|
(3)
|
Serial Communications
|
| |
Select
Nothing(leave field blank) for Standard Unit
-C24 for Isolated RS232 and RS485 300 to 19.2 k baud
|
(4)
|
Power Supply
|
| |
Select
Nothing(leave field blank) for Standard Power (90 to 240 Vac/dc @ 50 to 400 Hz)
-DC for Low Voltage Power (12 to 36 Vdc 24 Vac)
|
(5)
|
Menu Options
|
| |
Select
Nothing(leave field blank) for no option
-AL for Limit Alarm Version
-SM for Simplified menu (on/off control or alarms no PID)
|
(6)
|
Factory Setup
|
| |
Select
Nothing(leave field blank) for Standard Unit
-FS for Factory Setup and Configuration
|
| NOTE: All combinations may not be valid, check spec sheet for valid part numbers. |
| | | | |
|
|
 |
|
|
|
|
Keywords: i-Series 1/32 DIN Programmable Temperature, Strain / Process Controllers, with RS-232 RS-485 Communication, controller, PID temperature controller, tehrmocouple controller, digital PID Controllers, digital controller, digital indicator, digital panel meter, embedded web server, p & id, process instrumentation, heater controller, process meter, p&id, thermocouple controller
|
Back to top |
|
|
