|
|
|
|
The ultra-compact i8C and iS8C controllers
are similar to the full size i8 in an ultra-compact
enclosure. Only 51 mm (2") behind the panel. The i8C/iS8C display
can be programmed to change
color between GREEN, AMBER, or RED at any setpoint or alarm
point. The i8C/iS8C includes the option of both
RS232 and RS485 in 1 instrument
with both MODBUS® serial protocol
and the straightforward Newport®
ASCII protocol.
The i8C comes
standard with your choice of
2 control or alarm outputs in almost
any combination: solid state relays
rated at 0.5 A @ 120/240 Vac;
Form "C" SPDT relays rated at
3 A @ 120/240 Vac; pulsed 10 Vdc
output for use with an external SSR;
or analog output (0 to 10 Vdc or
0 to 20 mA) selectable for control or
retransmission of the process value.
The universal temperature and
process instrument offer a selection of 10 thermocouple
types as well as 2-, 3- or 4-wire
RTDs, process voltage and current.
The i8C controller is ideal for use with transmitters
and amplified transducers. Built-in
excitation is standard (24 Vdc
@ 25 mA). The units handle
0 to 20 mA process current and
process voltage in 3 scales:
0 to 100 mV, 0 to 1V, and 0 to 10V.
The strain/process instrument
(model iS) meters and controllers
measure inputs from load cells,
pressure transducers, and most any
strain gage sensor. Input ranges
include 0 to 100 mVdc; -100 mVdc
to 1 Vdc; 0 to 10 Vdc in addition to
0 to 20 mA. Excitation for transducers
of 5 V and 10 V is standard.
The enclosure has a
NEMA 4 (IP65) rated front bezel and electronics are removable from
the front panel.
For more information on iSeries click here
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes with complete operator’s manual.
1. "-DC" and "-C24" not available with excitation
2 .Analog output is not available with "-AL" units. 3. "-SM" option not available on iS strain models.
Ordering Example: (1) i8C33 1/8 DIN compact universal temperature process controller with 2 relay outputs = $355
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
 |
|
|
|
|
Option Descriptions
|
|
(1)
|
Input Type
|
| |
Select
i8C for Compact Case Meter(note - Isolated Analog and Ethernet options are not available in the compact case)
iS8C for Compact Case Strain Meter (note - Isolated Analog and Ethernet options are not available in the compact case)
i8 for Standard 1/8 DIN Meter
i8A for Isolated linear analog output (note - Analog output (option 5) and Ethernet options are not available for this i8A controller)
i8DH for 1/8 DIN Meter Dual Display Horizontal
i8DV for 1/8 DIN Meter Dual Display Vertical
iS8 for 1/8 DIN Strain Meter
|
(2)
|
Control Outputs
|
| |
Select
00 for No Output
22 for Two Solid State Relays
23 for One Solid State Relay - Form C SPDT
24 for 1 SSR for Pulse 10V dc
33 for 2 Relays - Form C SPDT
42 for Pulsed 10 V dc and SSR Relay
43 for Pulsed 10 V dc and Form C Relay
44 for 2 pulsed 10 V dc
52 for Analog Output and SSR
53 for Analog output and Relay
54 for Analog output and pulse
|
(3)
|
Network Options
|
| |
Select
Nothing(leave field blank) for No network option
-C24 for Isolated RS232 and RS485/422 300 to 19.2 k baud
-EIT for Ethernet w/ Embedded Web Server (not available for compact case)
-C4EIT for Ethernet w/ Embedded Web Server + Isolated RS485/422 (not available for compact case)
|
(4)
|
Power Supply
|
| |
Select
Nothing(leave field blank) for Standard power input for 90 to 240 Vac/dc, 50 to 400 Hz
-DC for 12-36 Vdc, 24 Vac (Internal Excitation is not available with this option)
|
(5)
|
Menu Options
|
| |
Select
Nothing(leave field blank) for no option
-AL for for Limit Alarm Version (Alarm Menu, No PID Control)
-SM for for Simplified Menu Version (ON/OFF Control, No PID Control)
|
(6)
|
Factory Setup
|
| |
Select
Nothing(leave field blank) for no option
,FS for Factory Setup and Configuration
|
| NOTE: All combinations may not be valid, check spec sheet for valid part numbers. |
| | | | |
|
|
 |
|
|
|
|
Keywords: i-Series 1/8 DIN Programmable Temperature, Strain / Process Controllers, with RS-232 RS-485 Communication, controller, PID temperature controller, tehrmocouple controller, digital PID Controllers, digital controller, digital indicator, digital panel meter, embedded web server, p & id, process instrumentation, heater controller, process meter, p&id, thermocouple controller
|
Back to top |
|
|
