High Accuracy ±0.5°C, 0.03% Rdg. High
Quality–Extended 5-Year Warranty at No Extra Charge Universal
Inputs– Process Voltage/Current Thermocouple, RTD Custom
Configurations and Firmware Available in Quantity–Consult NEWPORT
OEM Group Dual
4-Digit LED Display and Indicators for Output and Alarm Status Relay,
SSR, dc Pulse, 0 to 10 V and 0 to 20 mA Output Types Ramp
to Setpoint Feature Standard Universal
Power Supply, 90-250 Vac or Vdc (Optional 10-34 Vac or Vdc) Dual
Output and Dual Alarm Capability Optional
RS-232, RS-485, Isolated Analog Output or Remote Setpoint Selection
 The MICRO-INFINITY® controller features a large, dual LED display, front panel configuration, selectable Temperature/process inputs and universal power supply that accepts 90 to 250 Vac or Vdc. Available in single and dual output configurations, the ICN77000 Series is available with relay, SSR, dc pulse, analog voltage or current outputs. A single alarm is standard. Options include a second alarm, RS-232, RS-485, analog output or remote setpoint selection. The "ICN77300" series controllers have many features of larger, 1/4 DIN controllers in a compact, 1/16 DIN size. These controllers feature a 1/16 DIN cutout and bezel with a NEMA 12 rating, dual LED displays, with different colors for the actual process and setpoint values. Individual indicators provide output and alarm status. The "ICN77500" features a 1/16 DIN cutout, 53.3 mm (2.1") square face with NEMA 4 rating, large dual LED display, front panel configuration, and selectable Temperature/process inputs. Available in single and dual output configurations, the ICN77500 is available with relay, SSR, dc pulse, analog voltage or current outputs. A single alarm is standard. The ICN77R300 and ICN77R500 controllers feature a unique detachable display and adapter with a NEMA 1 rating to allow mounting in a round, 1.75" cutout. This feature allows users to prepare the panel with a standard round hole saw. The 2-piece design snaps together, for quick easy installation. SPECIFICATIONS Accuracy: ±0.5°C temp; 0.03% rdg. process Resolution: 1°/0.1°; 10 µV process Temperature Stability: 0.08°C/°C; 50 ppm/°C process Thermocouple Cold End Tracking: 0.05°C/°C NMRR: 60 dB CMRR: 120 dB Common Mode Voltage: 1500 V peak test, 350 V per IEC spacing A/D Conversion: Dual slope Reading Rate: 3 samples per second Digital Filter: Programmable Display: Dual 4-digit, 7-segment LED, 9.2 mm (0.36"); red process variable, green setpoint; indicators for output and alarm status; 7.6 mm (0.3") for NEMA 12 units Warmup to Rated Accuracy: 30 min INPUT Input Types: Thermocouple, RTD, analog voltage, analog current Thermocouple Lead Resistance: 100 ohm max RTD Input: 2, 3, or 4-wire, 100, 500, and 1000ohm, 0.00385 or 0.00392 Pt curve Voltage Input: 0 to 100 mV, 0 to 1 V, 0 to 10 Vdc Current Input: 0 to 20 mA, 4 to 20 mA Configuration: Single-ended Polarity: Unipolar Step Response: 0.7 sec for 99.9% Decimal Selection: None, 0.1 or 0.01 Span Adjustment: 0.001 to 9999 counts Offset Adjustment: -9999 to +9999 CONTROL Action: Reverse (heat) or direct (cool) Modes: Time proportioning and proportional control modes; selectable preset tune, adaptive tune, auto-tune, PID, proportional, proportional with integral, proportional with derivative with anti-reset windup, on-off Rate: 0 to 999.9 sec Reset: 0 to 99 min 59 sec Cycle Time: 1 to 199 seconds; set to 0 for on/off operation Gain: 0.5 to 100% of span; setpoints 1 or 2 Damping: 1 to 8 in unit steps Soak: 00.00 to 99.59 (HH.MM) Ramp to Setpoint: 00.00 to 99.59 (HH.MM) Autotune: Operator initiated from front panel CONTROL OUTPUT Relay: 5 A @ 120 Vac, 3 A @ 240 Vac; configurable for on/off, PID or ramp and soak; output 1: SPDT type; output 2: SPST type SSR: Rated 1 A @ 120/240 Vac, continuous DC Pulse: non-isolated; 10 Vdc @ 20 mA Analog Output: 0 to 10 Vdc or 0 to 20 mA; 500 ohm max OPTIONS Remote Setpoint Selection: Up to 3 setpoints stored in memory; contact closure selection Analog Output: Isolated 0 to 10 Vdc or 0 to 20 mA, programmable COMMUNICATIONS RS-232 or RS-485: 300 to 19.2k baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status RS-485: Addressable from 0 to 199 Connection: Screw terminals ALARM 2 Type: SPST relay, 5 A @ 120 Vac, 3 A @ 240 Vac Operation: High/low, latching/ non-latching, and process/deviation; front panel configurations INSULATION Power to input or Output: 2500 Vac or dc except for alarm 2 option has only 1500 Vac or dc between inputs 500 Vac or dc GENERAL Power: 90 to 250 Vac/dc, 50 to 400 Hz; 10 to 34 Vac/dc power optional Operating Ambient: 0 to 55°C (32 to 131°F), 90% RH non-condensing Power Consumption: 6 VA max @ 120 Vac PANEL CUTOUT ICN77R000 Series: 44.5 mm (1.75") dia. round cutout ICN77300 and ICN77500 Series: 45 mm (1.772") square, 1/16 DIN DIMENSIONS ICN77R000 Series: 48 H x 48 W x 144.7 mm D (1.89" x 1.89" x 5.70") ICN77300 Series: 48 H x 48 W x 123.3 mm D (1.89" x 1.89" x 4.85") ICN77500 Series: 53 H x 53 W x 123.3 mm D (2.1" x 2.1" x 4.85") Weight: 227 g (0.5 lb) BEZEL AND PANEL CUTOUT ICN773 (NEMA-12, IP50) INFINITY® Style 1/16 DIN bezel 1.89" (48 mm) sq. 1/16 cutout 1.772" (45 mm) sq. ICN77R3 (NEMA-1) INFINITY® Style 1/16 DIN bezel 1.89" (48 mm) sq. 1 3/4" (44 mm) round cutout ICN775 (NEMA-4, IP65) NEMA 4 bezel 2.1" (53.4 mm) sq. 1/16 cutout 1.772" (45 mm) sq. ICN77R5 (NEMA-1) NEMA 1 bezel 2.1" (53.4 mm) sq. 1 3/4" (44 mm) round cutout |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
Back to top  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sitemap | Order Status | Careers | About Us | ISO 9001 | Worldwide Affiliates | Terms & Conditions Copyright ©2012, NEWPORT Electronics, Inc. All rights reserved. |