The
IDPH is an economical, user-friendly panel
meter for pH measurement. Its small size allows for
easy installation and will accommodate any pH electrode
with BNC connector. Temperature compensation is either
manual or automatic with use of any 1000 ohm platinum
RTD. The IDPH features a compact depth of only 104
mm (4.10"), allowing for mounting in areas with limited
panel depth.
pH
electrodes sold separately
SPECIFICATIONS Accuracy:
±0.02 pH Input Impedance:1012 ohms Operating Temp: 0 to 50ºC (32 to 122ºF) Storage Temp: -40 to 85ºC (-40 to 185ºF) Relative Humidity: 95% @ 40 ºC, non-condensing Temp. Compensation: Manual fixed resistors; Automatic
1000 ohm RTD Display: 4 digit, red LED, 14.2 mm (0.56") high Display Range: 0-14 pH Connections: BNC
POWER REQUIREMENTS Voltage: 115 Vac ±10% standard (230 Vac or 10-32 Vdc
optional) Frequency: 50 or 60 Hz Power Consumption: 2.5 watts max.
MECHANICAL SPECIFICATIONS Dimensions: 96 W x 48 H x 104 mm D (3.78" x 1.89" x
4.10") Panel Cutout: 92 W X 45 mm H (1/8 DIN, 3.62" x 1.77") Depth Behind Panel: 100 mm (3.94") Weight: 312 g (11 oz)
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) IDPH-2 Monitor with green LED display and 115 Vac power = $260
Part Number Builder
Option Descriptions
(1)
POWER AND LED COLOR
Select 0 for Designates 115 Vac power and red LED display 1 for Designates 230 Vac power and red LED display 2 for Designates 115 Vac power and green LED display 3 for Designates 230 Vac power and green LED display 4 for Designates 10-32 Vdc power and red LED display 5 for Designates 10-32 Vdc power and green LED display
(2)
ADD-ON OPTION (IDP)
Select Nothing(leave field blank) for No Option ,BL for Blank Lens
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
pH
METER
