Navigation image map
Contact Us Distributor Site Map Manuals Home Products

Large Display Meters and Signal Conditioners

Large Display Meters and Signal Conditioners
BIG Bright 2.25" (57.2 mm) or 4.00" (101.6 mm) LED
BIG 7-segment LEDs, 4 or 6-Digits
Program to Change Colors: RED, AMBER, GREEN
AC Current Input
AC Voltage Input
Frequency/Pulse/Rate/Totalizer Input

5 Year Warranty

Scroll Below to Order Specs Manuals Software Mechanical

Starting from Feb 1st 2018, ILD-FP & -AC Series will be discontinued. As a possible substitute, please check out the ILD-UTP & -SP Series for details.

The "AC Large Displays" (iLD-ACC and iLD-ACV) provide accurate isolated measurement of AC Voltage and Current signals. The AC Voltage model can be scaled for ranges from 0 to 400 mVac through 0 to 400 Vac. The AC Current model covers ranges from 0 to 10 mA through 0 to 5 Amps AC.

The "Frequency Pulse Large Display" (iLD-FP) provides accurate isolated measurement of frequency (from 200 Hz to 50 KHz) and pulse signals (up to 200 M pulses full scale) that can be scaled to any engineering units.

Programmable Color Display
The iLD-ACC, iLD-ACV, and iLD-FP feature BIG bright 7-segment LED's that can be programmed to change colors between RED , AMBER, and GREEN to indicate visual alarms.

The Large Display can be mounted flush in a panel or surface mounted with the included brackets. The entire Large Display enclosure provides NEMA 4 (IP65) protection. Whether panel-mounted or surface-mounted, the Large Display does not need to go inside a bulky and expensive NEMA enclosure.
Programmable Color Display
Configuration of the iLD-ACC, -ACV, or -FP will be performed using RS485 communication standard at half duplex and the configuration software that is available on our website.

With the Ethernet (-EI) option you can "see" your meter and control your process through a web browser over the Internet from halfway around the world.

With the Isolated Analog Output (-C2A) option, user can select output range for 0 to 10V, 4 to 20 mA, or 0 to 20 mA using serial RS232 and the configuration software (this eliminates the RS485 communication available on the standard model).

Factory Scaling (,FS) is available if you prefer the unit to be fully configured before shipment.

Please provide your selections for Factory Scaling settings:

Input Range: 10 mA, 100 mA, 1 A, 5 A
Input Range: 400 mVac, 40 Vac, 400 Vac
Select your Input Range and Display Range
Factory Scaling Example:
0 to 5 A = 0 to 50.00
Select your Input Range and Display Range
Factory Scaling Example:
0 to 400 Vac = 0 to 6000
Pick from each selection
Mode: Frequency, A-B, Totalize
Excitation: 12.5 V, 5 V, 8 V
Pull up/down: None, 3 K pull-up, 1 K pull-down
Gate Time: in milliseconds
Debounce Time: in milliseconds
Debounce Contact: Yes/No?
Low Level Input: Yes/No?
Frequency Range: 0.2 Hz to 50 KHz
For Frequency Mode select your Input Range and Display Range
Factory Scaling Example for Frequency Mode: 0 to 1 KHz = 0 to 5000
For Totalize and A-B Mode select your Input Range and Display Range
Factory Scaling Example for Total / A-B Mode: 0 to 100 pulses = 0 to 2000 display counts
All dollar amounts on this site are shown in US currency.

Keywords: Extra large display, Big Display, Big Displays, Big Display Meter, Signal Conditioner, AC Voltage, AC Current, Frequency, Pulse, Rate, Totalizer

   Back to top
Sitemap | Careers | About Us | ISO 9001 | 1-800-NEWPORT
© Copyright 2003-2019 OMEGA Engineering inc. • Terms and Conditions