Navigation image map
Contact Us Distributor Site Map Manuals Home Products

Remote Large Display
iLD-C2, iLD-EI
- Discontinued-

Large Display, Remote Display
BIG Bright 2.25" (57.2 mm) or 4.00" (101.6 mm) LEDs
BIG 7-segment LEDs, 4 or 6-Digits
Program to Change Colors: RED, AMBER, GREEN
RS232/RS485 Input
Ethernet Input

5 Year Warranty

Scroll Below to Order Specs Manuals Software Mechanical

Starting from Feb 1st 2018, ILD-EI & -C2 Series will be discontinued. As a possible substitute, please check out the ILD-UTP & -SP Series for details.

The "Serial RS232 Large Remote Display" (iLD-C2) are 4 or 6 digit slave displays providing remote readout from instruments such as programmable controllers, digital panel meters and other instruments with serial output. Two communication interfaces are supported in Remote Display: RS232 and RS485 and can be programmed through front panel buttons.

The iLD-C2 can display data transmitted via serial communications from a computer, or from other devices which transmit ASCII data via RS232 and RS485. These BIG Displays are compatible with virtually all NEWPORT® devices that feature serial communications including: iSeries meters and controllers, INFINITY® digital panel meters, MICRO-INFINITY® controllers, iDRX DIN-RAIL mounted signal conditioners, and many more.

The "Ethernet Large Remote Display" (iLD-EI) are 4 or 6-digit slave displays providing remote readout from instruments with an Ethernet output or display data from a computer.

The iLD-EI can display data transmitted via Ethernet from Newport instruments that have an Ethernet output option, (iSeries with -EI). You can tunnel or display the same data from a computer using telnet. Any two units with Ethernet option (iSeries with -EI or iServer) can talk to each other over the Ethernet LAN, WAN, and Internet using TCP/IP protocol. This allows the connected serial devices to an iServer to communicate with each other back and forth over TCP/IP networks.
Programmable Color Display
The iLD-C2 and iLD-EI feature BIG bright 7-segment LED's that can be programmed to change colors between RED, AMBER, and GREEN to indicate visual alarms.
In the "slave" mode, the large remote displays can be used for displaying alphanumerical characters from a computer using serial connection (iLD-C2) or Telnet (iLD-EI). Compatible Host device must feature serial RS232 or RS485 output.

The Large Display can be mounted flush in a panel or surface mounted with the included brackets. The entire Large Display enclosure provides NEMA 4 (IP65) protection. Whether panel-mounted or surface-mounted, the Large Display does not need to go inside a bulky and expensive NEMA enclosure.
Programmable Color Display
All dollar amounts on this site are shown in US currency.

Keywords: Extra Large Display, Big Displays, Ethernet Big Display, Serial Remote Display

   Back to top
Sitemap | Careers | About Us | ISO 9001 | 1-800-NEWPORT
© Copyright 2003-2020 OMEGA Engineering inc. • Terms and Conditions