Navigation image map
Contact Us Distributor Site Map Manuals Home Products


INFINITY® pH Controller
INFCPH

pH Controller
Microprocessor-Based Versatility
High and Low Alarm Setpoints
Scalable 4 to 20 mA, 0 to 20 mA or 0 to 10 V Output
Compact Panel Design
Automatic Temperature Compensation
Open Sensor Detection



1 Year Warranty
Electromagnetic CompatibilityINFCPH only

Omega StrongSame Quality Product – New Name!
We’re building a stronger, unified brand so we can provide you with the best products in the industry. To do this, the Newport branded products will now be Omega branded starting Nov 26, 2018. You can expect the same support and quality as always, and of course the same features and specs, just with a new part number and logo. Please refer to PHCN-37 products at omega.com for details.


This microprocessor-based pH panel mounted controller is designed for a wide variety of environmental monitoring applications. The units features automatic or manual temperature compensation of pH, two 5 amp mechanical relays and a choice of a scalable 4 to 20 mA, or 0 to 20 mA control or recording output or a 0 to 10 V output. For ease of operation all calibration and parameter setpoints are selectable through the front keypad. The INFCPH can be interfaced with a variety of pH electrodes.

The INFCOR and INFCOP series have been discontinued. Please contact our Sales Engineering department if you are in need of a replacement for these series.

SPECIFICATIONS


pH

Range:0 to 14.00 pH (620mV to -620mV); 0 to 100°C
Resolution: 0.01 pH, 0.1°C
Calibration pH: 2 or 3 point
Accuracy: ±0.01 pH; ±0.5°C

COMMON SPECIFICATIONS
Display: 4-digit, LED, 13.7 mm (0.54")
Relays: dual SPDT (form C) 5 A at 240 Vac, mechanical relay. Programmable deadband hysteresis around setpoints.
Output: 4 to 20 mA, 0 to 20 mA or 0 to 10 V (Scalable) Software selectable.
Input Impedance: >1012 ohms
Temperature Compensation: Manual or Automatic, 0 to 100°C using Pt 100 or 1K ohm RTD
Connectors:
   pH: BNC
   Temperature: terminal strip
Power: 115 Vac, 230 Vac, 50/60 Hz; 10-32 Vdc
Panel Cutout: 1/8 DIN, 45 H x 92 mm W (1.772" x 3.622")
Dimensions: 48 H x 96 W x 177 mm D (1.89" x 3.78" x 7.00")
Weight: 580 g (1.27 lb)

All dollar amounts on this site are shown in US currency.


   
Keywords: Microprocessor-based, pH Controller, with Automatic Temperature Compensation, environmental monitor, digital indicator, pH conductivity meter, pH control, pH controllers

   Back to top