PANEL METERS/CONTROLLERS
The unparalled accuracy of the NEWPORT®
Electronics INFINITY® signal conditioning
is available in an economical series of Panel Meter/Controllers.
The NEWPORT INFINITY® "C" series
of meter/controllers feature a four digital display plus
optional dual 5 amp Form C relays and a choice of isolated
or non-isolated analog output. The scalable 0-10 Vdc, 0-20mA,
or 4-20 mA analog output can be used a retransmission of
the display value or as a proportional control output as
required. The microprocessor based INFINITY®
"C" series includes instruments for Process (DC
voltage and current) Strain Gage, Thermocouple, RTD, Dual/Differential
Thermocouple, Dual/Differential RTD, pH, ORP.
THERMOCOUPLE METER/CONTROLLER
The NEWPORT INFCTP accepts type J, K, T and DIN J
thermocouples. Standard features include resolution of 0.1°
or 1.0°, °F or °C indication. Factory default setup is type
K thermocouple input in °F. Relay models offer the choice
of linear or proportional analog output.
5TC
Ready-made
Insulated Thermocouples
|
SPECIFICATIONS
Input:
Thermocouples types, J, K, T, and J DIN
Relay Outputs: 2 Form C (SPDT) relays, rated 5 Amp
250 Vac; programmable for active high/low alarms with latching/non-latching
relays. The INFCTP includes an NPN open-collector
transistor output for time proportional setpoint 1.
Relay Hysteresis: programmable from 0 to 9999
Analog Output: Scalable 0-10 Vdc or 4-20 mA
Accuracy
@ 25 °C: ±0.5°C (after 30 min. warm-up)
Temperature Coefficient: ±50 PPM/°C
Read Rate: 3/sec
Step Response: 2 seconds
Isolation: Dielectric strength to 2500V transient
per 3mm spacing based on EN 61010 for 260 Vrms or DC.
NMR: 60 dB
CMR: 120 dB
Input Resistance: 100 Mohms
Operating Temperature: 0 to 50°C (32 to 122°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Display: 4-digit, LED 14-segment, 13.8 mm (0.54")
Dimensions: 48 H x 96 W x 152 D mm (1.89" x 3.78" x
6.0")
Panel Cutout: 45 x 92 W mm (1.772" x 3.622")
AC
Power Unit: 115 Vac or 230 Vac ±10%; 50-60 Hz, 8 watts
max.
DC Power Unit: 10-32 Vdc or 26-56 Vdc; 7 watts max.
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Each unit comes complete with operator's manual.
Ordering Example: (1) INFCTP-011A INFINITY® "C" thermocouple meter/controller, 115 Vac power, red LED display, dual 5 A form C SPDT relays, and analog output = $395
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
 |
|
|
|
|
Option Descriptions
|
|
(1)
|
Power & Display Options
|
| |
Select
0 for 115 Vac power and red LED display
1 for 230 Vac power and red LED display
2 for 115 Vac power and green LED display
3 for 230 Vac power and green LED display
4 for 10-32 Vdc power and red LED display
5 for 10-32 Vdc power and green LED display
6 for 26-56 Vdc power and red LED display
7 for 26-56 Vdc power and green LED display
|
(2)
|
Control and Analog Outputs
|
| |
Select
11A for dual relays and analog output
12A for dual relays and isolated analog output
|
| NOTE: All combinations may not be valid, check spec sheet for valid part numbers. |
|
|
|
 |
|
|
|
|
Back to top |
|
|
