Starting from Feb 1st 2018, INFLDTA Series will be discontinued. Looking for a possible substitute, please contact us for details.
The INFLDTA provides a five-key front panel, which can
be used to select mode of operation, scale factor, zero offset
and two setpoints for ON/OFF control or alarm. Setup parameters
can be saved in non-volatile memory with four levels of front-panel
lockout for program security. In addition, the P5000 can be programmed
via RS-232. It can also report its own setup data and transmit
ongoing readings and alarm status via RS-232 or 20 mA ASCII current
loop. Modem support is built in for remote operation.
The INFLDTA is a high accuracy indicator/controller for
use with Newport’s line of linear displacement transducers. A
bright, readable display gives you quick and accurate measurement
information. Three open collector outputs let you preset high,
low and go setpoints so that you get the right measurement time
after time. This highly accurate product is easily scaled in virtually
any units of measure right from the front-panel. Hardware lockouts
allow you to prevent unauthorized adjustment of the meter. A standard
NEMA 4 (IP65) front bezel will stand up to tough industrial environments.
The full 6-digit display lets you measure accurately down to 1/1000th
of an inch!
The linear displacement display (INFLDTA) launches a current pulse
along a wire inside the LDT probe. When the magnetic field
of the current pulse interacts with the magnetic field of the
rare-earth magnet a torsional strain pulse is sent back to the
INFLDTA. The lapsed time between the current pulse and the returning
strain pulse is measured and scaled to read in engineering units
(i.e., inches, millimeters, etc.).
Accuracy at: 25°C
Maximum Error: ±0.001 inches
Warmup to Rated Accuracy: 115 min.
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -40°C to 85°C (-40 to 184°F)
Relative Humidity: 90% to 40°C (104°F) (non-condensing)
AC Voltage: 115 V or 230 V ±10%, 48 to 440 Hz
Consumption: 10 watts max.
Dimensions: 1.89" H x 3.78" W x 6.02" D (48 x 96 x 153
Panel Cutout: 1.78 H x 3.62" W
Weight: 1.27 lb. (574 g)