Navigation image map
Contact Us Distributor Site Map Manuals Home Products

INFINITY® 6-Digit Process Timer / Controller / Clock

INFINITY® 6-Digit Process Timer / Controller / Clock
6-Digit Alphanumeric Display
Configurable Via Front Panel Pushbuttons and/or Via RS-232 of RS-485
8 Built-In Time Bases
Resolution to 0.01 Sec
Count Up or Down Modes
Four Isolated Open Collector Outputs
Five Controller Output Modes
Time of Day Clock
Battery Backup–Optional

Starting Oct 6th, 2017, the INFPT series will be discontinued. Looking for a possible substitute, please check out the PTC-13 Series for more details.

The INFPT multifunctional panel meter is designed to be set up as a clock/timer controller or stopwatch. The unit contains eight different time bases and has a built-in date function. The meter employs five controller output modes, which enable the user to set up the unit to virtually any timer control application.

The INFPT is perfectly suited for life cycle testing, turning four loads on and off based on timing cycle. The clock time base is derived from the 50 or 60 Hz power line and from the internal crystal oscillator. Front-panel pushbuttons provide a convenient means of configuration and access to the meter’s many features. These features can also be accessed through RS-232 or RS-485 serial communications. The front-panel displays values and messages with six, 14-segment LEDs.

Accuracy: max. error ±50 ppm over full temp range; Warmup to rated accuracy: 55 min
Display: 6-digit, 14 segment LED; 14.2 mm (0.56" H): 4 LED outputs to indicate ON or ACTIVE mode
Display Modes: 12-hour clock, 24-hour clock, 99-day, 99-hour, 99-minute, 999999-hour, 9999.99-hour, 9999.99-minute, 9999.99-sec
TTL Outputs: 4, standard; rated 150 mA at 1 V sink: 30 V open
Relay Outputs (optional): Dual relays, form C, 7A at 30 Vdc or 230 Vac
Four-Relay Board (optional): Dual 7 amp and Dual 1 amp form C relays
Power: 115 or 230 Vac ± 10%, 49-440 Hz (to 440 Hz with 110 or 220 V min)
Power Consumption: 3 to 10 Watts max.


Input Threshold:
1 V to 3.5 V
Protection Level: 24 Vdc
Connection: Two 3-Socket input plugs
Input Resistance: 30 kohm pull-up resistor to +5 V
Operating Ambient Range: 0 to 50°C (32 to 122°F)
Relative Humidity: 90% at 40°C (non-condensing)
Dimensions: 48 H x 96 W x 156 D mm (1.89" x 3.78" x 6.13")
Panel Cutout: 45 H x 96 W mm (1.772" x3.622"); 1/8 DIN
Weight: 574 g (1.27 lb)

Power/ Display
Control Output
Serial Output
( * )
( * )
( * )
Process Timer/Controller
    115 Vac power, red LED display
    230 Vac power, red LED display
    115 Vac power, green LED display
    230 Vac power, green LED display
  Four NPN open collector transistors
  Isolated parallel BCD
  Two 7 A relays
  Two 7 A relays and two 1 A relays
No serial output
Isolated RS-232
Isolated RS-485
All dollar amounts on this site are shown in US currency.

Keywords: INFINITY® 6-Digit Process Timer / Controller / Clock

   Back to top
Sitemap | Careers | About Us | ISO 9001 | 1-800-NEWPORT
© Copyright 2003-2019 OMEGA Engineering inc. • Terms and Conditions