The iSE-TH has been replaced by an enhanced version. Please see the iSD-TH for product details
|
Environmental Surveillance over the
Internet
Web-based Remote Surveillance of
Temperature + Humidity and
Security
|
Features |
 |
Email Alarms
|
|
Virtual Chart Recorder |
|
Web Server |
|
Accurate |
|
Data Logging |
|
No Special Software
Required
|
|
|
|
The
NEWPORT® iSE
environmental monitor provides Web-based remote surveillance of
environmental conditions in critical HVAC applications such as
computer server rooms, clean rooms, laboratories, museums,
warehouses, or any remote facility.
View and record Temperature,
Relative Humidity and Dew Point over an Ethernet network or the
Internet with no special software—just a Web browser.
|
|
Email Alarms
The device can trigger an
alarm if temperature or humidity goes above or below a set point
that you determine. Your alarm can be sent by email to a single user
or to a group distribution list, including text messages to Internet
enabled cell phones and PDA’s.
Physical
Threats
The NEWPORT iSE includes screw terminals for two
contact closures that work with common alarm sensors. You can
instruct the iSE monitor to send an alarm if a door is opened, a
window is broken, or a fire sprinkler goes off.
Power Failure
The
iSE monitor can
trigger an alarm if the AC power fails. The iSE monitor will continue to collect
data for ten days powered by a standard 9 Volt alkaline battery
(included). The data is stored in nonvolatile flash memory and can
later be downloaded over the Ethernet.
Local Alarms
The
NEWPORT iSE monitor includes two 1.5 Amp
output relays that are controlled by the alarm conditions you
select. The relays can trigger flashing lights and a siren for
example to alert personnel near the scene.
With the easy
Web-based setup page, the two relays can be programmed for any
combination of temperature or humidity, and high or low set points,
as well as alarm conditions triggered by contact closures. The
relays can also be programmed to turn off when conditions return to
normal, or programmed to remain latched and require a manual
reset.
View Charts and
Graphs on the Web
The NEWPORT iSE serves Active Web Pages to
display real time readings, display charts of temperature and
humidity, or log data in standard data formats for use in a
spreadsheet or data acquisition program such as Excel or Visual
Basic.
The virtual chart viewed on the web page is a JAVA™
Applet that records a chart over the LAN or Internet in real time.
With the NEWPORT iSE, there is no need to invest
time and money learning a proprietary software program to log or
chart the data.
Chart scales are fully adjustable on the fly.
For example, the chart can display one minute, one hour, one day,
one week, one month or one year. Temperature and humidity can be
charted across the full span (-40 to 124°C, and 0 to 100% RH) or
within any narrow range such as (20 to 30°C).
|
|
Link to Web CAM or
IP Camera
The Web page includes a link to a “Web Cam” or
“IP camera” (not included). If you get a message about an alarm
condition, you can quickly click on the link to view the actual
scene over the Internet.
|
|
Flash Memory
The NEWPORT iSE records data on a removable
2-MByte Flash Memory card (included) that can store one full year of
readings taken at one-minute intervals (or two months of readings
taken at ten second intervals). Up to four years of temperature +
humidity readings can be stored on the optional 8 MByte card. Even
if the Ethernet network fails, data will continuously record on the
built-in nonvolatile flash memory.
|
The iSE monitors come
complete with a plug-in temperature and humidity probe that mounts
on the instrument or separately with the six foot extension cable
(included). The temperature/ humidity sensors are interchangeable
and do not require routine calibration. And if a replacement sensor
is ever needed, the instrument does not require
calibration.
Installation
and operation of the NEWPORT iSE
monitor requires no special training, tools, or software. The device
connects to any Ethernet network with standard cable and plugs and
is powered by any AC outlet supplying 110-230
VAC.
|
|
Award-winning
Technology
The NEWPORT iSE
is simple to install and use, and features NEWPORT's award-winning
iServer technology that requires no special software except a Web
Browser. The iSE connects to an
Ethernet Network with a standard RJ45 connector and sends data in
standard TCP/IP packets. It is easily configured with a simple menu
using a Web Browser and can be password protected. From within an
Ethernet LAN or over the Internet, the user simply types its IP
address or an easy to remember name such as "Cleanroom 5" or
"Midwest Server Room" in any Web Browser, and the iSE serves a Web Page with the current
readings.
Typical
Applications
The NEWPORT iSE is great for monitoring temperature +
humidity in applications such as: clean rooms, computer rooms, HVAC
systems, pharmaceutical and food processing and storage, hospitals,
laboratories, semiconductor fabs, electronic assembly, warehousing,
museums, manufacturing, greenhouses, farm animal shelters, and many
more.
NEWPORT iServer products are designed and manufactured
in Santa Ana, California.
|
|
Specifications
Sensor Specifications
Relative Humidity
Accuracy/Range:
±2% for 10 to 90%
±3% for 0 to 10% and 90 to
100%
Non-linearity: ±3%
Hysteresis:
±1%RH
Response Time: 4 seconds
(63%
slowly moving air)
Repeatability:
±0.1%
Resolution: 0.03%, 12
bit
|
Temperature
Range/Accuracy*:
Standard
Probe:
±0.5°C ( ±1°F) 0°C to 70°C
(32°F to 158°F)
Industrial Probe:
±0.5°C (
±1°F) for 0 to 80°C (32 to 176°F)
±1°C (±2°F) for -40 to 0°C and
80 to 124°C
(-40 to 32°F and 176 to 254°F)
Note:
extended temperature range is for industrial probe only,
the iServer’s operating temperature is 0-60°C.
Response
Time:
5 seconds (63% slowly moving
air)
Repeatability:
±0.1°C
Resolution: 0.01°C,
14bit
|
|
Probe
Dimensions
Housing material: SS
316
Standard Probe:
Ø13mm x 83.8mm
(0.5” x 3.3”)
Industrial Probe:
Ø16mm x
137mm (0.63” x 5 ”);
Cable: 3m (10’) long,
operating temperature:
-40º to 125ºC (-40º to
257ºF)
|
Optional Caps
available for
Industrial Probes. |
iSE
Specifications
Interface: Ethernet
10Base-T
Connector: RJ45
Supported
Protocols: TCP/IP, UDP/IP, ARP, ICMP, DHCP, DNS, HTTP,
Telnet
Indicators (LED’s): Power, Network
Activity, Network Link and Diagnostics
LCD
Display: 32 Digits, 4.8 X 9.7mm (0.19 x 0.38")
Memory: 512 Kbyte Flash, 16 Kbyte
SRAM
Memory Data Flash Card: 2 M bytes: 2 months
of datastorage at 10 second logging intervals or 1 year at 1 minute
intervals.
Relay Outputs: Two Relays 1.5A @ 30
Vdc
Alarm I/O: Two Contact Inputs, One Open
Collector Output 150mA @ 30Vdc
Management:
Device configuration and
monitoring through embedded Web server
Software Firmware upgradeable.
Including an Excel program for automatic data logging within
definable time intervals, compatible with all Windows operating
systems.
Embedded Web Server: Serves Web pages
containing real-time data and
live updated charts within
definable time intervals.
Operating
Temperature: 0 to 60°C (32 to 122°F)
Packaging
Material:
SS 304 case with wall mount bracket
Dimensions:
119.1H x 155.7W x 33.3D mm (4.69 x 6.13 x 1.31 in) includes
probe.
|
|
Power
Power Input :
9 to 12Vdc
Consumption:
2.5 W max.
Safety Qualified ac Power Adapter
(included)
Nominal Output: 9 Vdc @ 0.5 A
Input:
100 to 240 Vac, 50/60
Hz
Power
Adapter Operating
Temperature:
0º to 40ºC (32º to 104ºF)
Battery: 9 Vdc, Alkaline
|
Universal ac Power
Adapter
included with iSE
|
Web Server
Screen Shots
Fig. 1- WEB page displaying data
received
Fig. 2- WEB page
displaying the graph of the received
data
Fig. 3 - Device
configuration through embedded WEB
server
|
Mechanical Dimensions
iSE-TH Dimensions  |
|
Replacement Probes with
Calibration Certificate
 
No need to take your unit out of service to
get re-calibrated, order a calibrated probe instead.
| |
|
Copyright ©2008, NEWPORT Electronics, Inc. All
rights reserved.
|
The iSE-TH has been replaced by an enhanced version. Please see the iSD-TH for product details
|
|
|
† All dollar amounts on this site are shown in US currency.
|
|
|
|
|
|
|
Keywords:temperature web internet humidity
|
Back to top |
|
|
