Navigation image map
Contact Us Distributor Site Map Manuals Home Products

Wireless Transceiver Module

Universal Wireless Transceiver Module
Add Wireless Capability to Any Standard Process Input Instrument
Analog Output Signal
Easily Connect to Panel Meters, Controllers, PLCs, Chart Recorders and Data Loggers
Simple, Single Channel Operation
Includes Mounting Bracket and 1.8 m (6') Integral Cable
Powered From Host Instrument or External Power Supply
MWTC-REC6 Works with All NEWPORT MWTC Series Wireless Connectors (5 or 10V Output Models)
UWTC-REC6 Works with All NEWPORT UWTC Series Wireless Connectors-Transmitters and Probe Assemblies (5 or 10V Output Models)

1 Year Warranty

Scroll Below to Order Specs Manuals

Starting from Apr 1st 2018, the MWTC-REC6 and UWTC-REC6 receivers will be discontinued. As a possible upgrade, please check UWTC-REC2 and WRS232 or contact our customer engineering for details.

With NEWPORT’s new universal wireless transceiver modules you can eliminate the wire connection between your sensor and instrument. Simply connect this transceiver to the analog input on your instrument and you’ll be able to receive wireless measurements from many different wireless sensors including Newport’s patented wireless thermocouple and RTD connectors, pH, infrared temperature, relative humidity, process input transmitters and our NB9 Series of industrial wireless probe/transmitter assemblies. Both models are packaged into a miniature housing for easy mounting and connection. This receiver provides stable, reliable wireless reception from your sensor.

Power: 12 to 24 Vdc @ 50 mA
Analog Output: 1, non-isolated, retransmission 0 to 5 Vdc, 0 to 10 Vdc
Connection: 1.8 m (6') integral cable (included) with stripped wire termination, for both power and output
Ambient Operating Range: -10 to 70°C (-14 to 158°F), 0 to 95% RH (non-condensing)
Radio Receiver Frequency (RF):
  MWTC-REC6: 915 MHz
  UWTC-REC6: 2.4 GHz
Enclosure: ABS (plastic)
Dimensions: 76 L x 32 W x 26 mm H (3 x 1.25 x 1 in)
All dollar amounts on this site are shown in US currency.

 Note: Comes complete with 1.8 m (6') integral power/output cable, mounting bracket, and operator's manual.
Requires one Model REC6-PC Setup/Programming Cable and Software.
Note: Because of transmission frequency regulations, these products may only be used in the United States and Canada (915 MHz models).

Keywords: Universal Wireless Transceiver Module

   Back to top
Sitemap | Careers | About Us | ISO 9001 | 1-800-NEWPORT
© Copyright 2003-2019 OMEGA Engineering inc. • Terms and Conditions