Industrial Replacement Probes
Rigidly Mounted or Spring Loaded 1/2" NPT Mounting Thread
NB1
/ NPT
 |
Direct
Surface Contact |
|
For
Use in Thermowells |
|
Faster
Response |
|
12"
Length Stock |
|
Custom
Lengths Available |
|
Inconel
or 304 Stainless Steel Sheath |
|
J,
K, T and E Calibrations in Stock |
|
1/16",
1/8", 3/16", and 1/4" Diameters In Stock
|
|
Use
with Any Protection Head! |
|
Made
with Special Limits of Error Material |
Rigidly mounted probes have 1/2" NPT mounting thread.
They are supplied with a hex nipple for attachment to tank walls,
pipe fittings, or conduit. The fitting is silver soldered to the
probe sheath for a positive pressure seal. Supplied with 11/2"
(38mm) of bare leads with epoxy seal.
Price: NB1 Price Less $14
Replacement Probe
To Order: Add suffix RP to part numbers of NB series probes.
Example: NB1-CAIN-14G-12-RP
Nipple Assembly Probe Length Includes 1/2" Thread Allowance
Note: Head sold separately. Other lengths available, consult
Sales Department.
Spring loaded thermocouple probes are designed to provide
fast response when used in a thermowell. Approximately 1/2"
(12mm) of travel is standard. Thermocouple junction cannot be
damaged when installed into a thermowell. This probe is also ideal
for use as a bearing sensor.
To Order: Add Suffix "-RP-HNSL" to model
numbers of NB1 and NB2 probe.
Example: NB1-ICSS-316G-12-RP-HNSL
Nipple Assembly Probe Length Includes 1/2" Thread Allowance
Price: NB1-RP Price Plus $10
Note: Head sold separately.
|
Dual Element Thermocouples Also Available!
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Other lengths available, consult Sales Department.
Ordering Example: (1) NB1-ICSS-116G-12RP Type J replacement probe with rigid mount, 1/16" dia. 304 SS sheath, 12" length, grounded junction = $28
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
 |
|
|
|
|
Option Descriptions
|
|
(1)
|
Thermocouple Type
|
| |
Select
IC for Type J (Iron-Constantan)
CA for Type K (CHROMEGA®-ALOMEGA®)
CX for Type E (CHROMEGA®-Constantan)
CP for Type T (Copper-Constantan)
|
(2)
|
Sheath Material
|
| |
Select
IN for Inconel
SS for 304 Stainless Steel
321SS for 321 Stainless Steel
|
(3)
|
Sheath Diameter
|
| |
Select
116 for 1/16 inch
18 for 1/8 inch
316 for 3/16 inch
14 for 1/4 inch
|
(4)
|
Thermocouple Junction
|
| |
Select
G for Grounded
U for Ungrounded
E for Exposed
|
(5)
|
Probe Length
|
| |
Select
-12 for 12 inches
-18 for 18 inches
-24 for 24 inches
|
(6)
|
Probe Style
|
| |
Select
RP for rigid mount NPT thread
RP-HNSL for spring loaded NPT thread
|
| NOTE: All combinations may not be valid, check spec sheet for valid part numbers. |
| | | | |
|
|
 |
|
|
|
|
Back to top |
|
|