Ultra High Temperature Heavy Duty Standard Size Connectors NHXH and NHX Series
High-Strength Ceramic Construction Using High Purity Alumina
Both Economical Hollow Pin and Rugged Solid Pin Designs
One-Piece Body Design With Cover
Type UHX Has Removable Color Dot for Vacuum Furnace Applications
Designed for long-term use where economy is a factor, NHXH economy connectors are ideal for high-temperature applications. NHXH connectors are permanently dot-coded to conform to ANSI standards. For applications such as high vacuum furnaces where contamination would adversely affect the process, UHXH connectors are shipped with a removable coded dot. Temperature is limited only by the hardware. CHROMEGA® -ALOMEGA® , Iron-Constantan and CHROMEGA® -Constantan alloys can be used at temperatures up to 650°C (1200°F) and Copper-Constantan can be used accurately over its entire calibration range of 390°C (750°F). Noble metal calibrations are limited by the compensating alloys to ambient use of 260°C (500°F). No damage will be done by exposure to higher temperatures, but accuracies may exceed limits of error if a temperature gradient exists across the connector.
NHX Ceramic Connectors are permanently color-dot coded to conform to ANSI and NEWPORT standards. The one-piece body construction minimizes loose hardware. NEWPORT® UHX Ceramic Connectors are identical to the NHX models, and are also constructed to eliminate any contaminants. The UHX connector is ideally suited for applications such as high vacuum furnaces where contamination could adversely affect the process. All UHX connectors are shipped with a removable color-coding dot..
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for other available models.
† All dollar amounts on this site are shown in US currency.
Note: Type UHXH has an unglazed/removable color dot with no ink markings, for high vacuum furnaces where contamination could affect the process. To order UHX connectors with removable color dot, change “NHX” to “UHX” in part number. *When ordering separate male or female connectors, use the suffix “M” or “F” only. Ordering Example: (1) NHX-T-M Solid pin design T type thermocouple male connector = $10.6
Part Number Builder
Select NHXH for Hollow Pins NHX for Solid Pins
Select K for Type K T for Type T J for Type J E for Type E R/S for Type R/S G for Type G C for Type C D for Type D U for Uncompensated or Type B N for Type N
Select M for Male F for Female MF for Male/Female pair
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
Keywords: Ultra High Temperature Heavy Duty Standard Size Connectors