|
Ultra
High Temperature Standard Thermocouple Connectors
Type NOX & UOX Ceramic Rated to 650°C
(1200°F)
|
|
Solid
Pin Construction!
Available
with a color-coded glaze (NOX) or unglazed white (UOX), these
ceramic connectors conform to ANSI and NEWPORT standards.
UOX connectors should be used when glazed ceramic or nylon
connectors would contaminate vacuum systems. Temperature is
limited only by the hardware. Chromega®-Alomega®, Iron-Constantan
and Chromega®-Constantan can be used at temperatures up to
650°C (1200°F) and Copper-Constantan can be used accurately
over its entire calibration range of 400°C (752°F). Noble
metal and refractory metal calibrations are limited by the
compensating alloys to ambient use of 260°C (500°F). Accuracies
may exceed limits of error if a temperature gradient exists
across the connector.
Exclusive
Split Shell Design Simplifies Wiring!
Ordering
Example: Model NOX-K-M
O = Ceramic Connector
K = Calibration
M = Male
To order unglazed white shells, replace “NOX”
with “UOX” in the model designation. Price is
the same. |
|
Discount
Schedule
|
| 1-10 |
Net |
| 11-24 |
10% |
| 25-49 |
15% |
| 50-99 |
20% |
| 100
and over Consult Sales |
|
|
Alloy Code†
|
Type
of Thermocouple
Used in Connector
|
Compensating
Alloy Used in Connector |
Color Code |
Model
Number
Pair* |
|
+ |
- |
|
K
|
Chromega®-Alomega®
|
Chromega®
|
Alomega®
|
Yellow
|
NOX-K-MF
|
|
T
|
Copper-Constantan
|
Copper
|
Constantan
|
Blue
|
NOX-T-MF
|
|
J
|
Iron-Constantan
|
Iron
|
Constantan
|
Black
|
NOX-J-MF
|
|
E
|
Chromega®-Constantan
|
Chromega®
|
Constantan
|
Purple
|
NOX-E-MF
|
|
R/S
|
Pt/13%Rh-Pt
|
Copper
|
Alloy
#11
|
Green
|
NOX-R/S-MF
|
|
G
|
W-W/26%Re
|
Alloy
#200
|
Alloy
#226
|
Red/Grn
|
NOX-G-MF
|
|
C
|
W/5%Re-W/26%Re
|
Alloy
#405
|
Alloy
#426
|
Red
|
NOX-C-MF
|
|
D
|
W/3%Re-W/25%Re
|
Alloy
#203
|
Alloy #225
|
Red/Wht
|
NOX-D-MF
|
|
U
|
Uncompensated
|
Copper
|
Copper
|
White
|
NOX-U-MF
|
|
N
|
OMEGALLOY®
|
OMEGA-P®
|
OMEGA-N®
|
Orange
|
NOX-N-MF
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note:
Type U uncompensated connectors are used with type B thermocouples (Pt/6%Rh-Pt/30%Rh) *When ordering separate male or female connectors, use the suffix “M” or “F” only.
OMEGALLOY®, Type N, is generically known as Nicrosil-Nisil.
Ordering Example: (1) NOX-J-MF Ultra high temperature standard male/female connector pair, type J = $18.3
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
 |
|
|
|
|
Option Descriptions
|
|
(1)
|
Thermocouple Calibration
|
| |
Select
K for Type K
T for Type T
J for Type J
E for Type E
R/S for Type R/S
G for Type G
C for Type C
D for Type D
U for Uncompensated or Type B
N for Type N
|
(2)
|
Connector Contacts
|
| |
Select
M for Male
F for Female
MF for Male/Female Pair
|
| NOTE: All combinations may not be valid, check spec sheet for valid part numbers. |
|
|
|
 |
|
|
|
|
Keywords:Ultra High Temperature Standard Size Thermocouple Connectors, With and Without Glaze That Can Contaminate High Vacuum
|
Back to top |
|
|
