Navigation image map
Contact Us Distributor Site Map Manuals Home Products


8 or 16 Channel Universal Input Touch Screen Data Loggers
OM-DAQXL Series

Touch Screen Data Loggers | 8 or 16 Channel Input
7" Touch Screen TFT Display
8 (OM-DAQXL-1) or 16 (OM-DAQXL-2) Analog Channel Inputs
8 or 16 Virtual (Math) Channels
8 Digital I/O (4 Inputs, 4 Outputs)
Measures Voltage, Current, Thermocouples, RTDs, Thermistors, Strain Gage, Frequency and Pulse
24-Bit Analog Input Resolution
Fast Sampling Rate–125 Samples/Sec (1 Channel)
4 Alarm Outputs
Large Data Storage: 1 GB Internal Memory, 32 GB SD Card or 32 GB USB Drive
USB Device (PC Communication) and USB Host (USB Drive, Mouse, etc.)
Powers from Rechargeable Lithium-Ion Battery and/or AC Adaptor
Protective Rubber Boot - Comes with Hard carrying case
Benchtop or Wall Mount Enclosure Design

1 Year Warranty New Electromagnetic Compatibility

Scroll Below to Order Specs Manuals QuickStart Software

OM-DAQXL is an 8 or 16 channel analog input portable data logger with a 7 inch resistive touch color display. All inputs are programmable and can be configured for millivolts, volts, milliamps, thermocouple, RTD, thermistor, strain gauge, or frequency. All the menus, selections, and configurations can be done from the display touch screen. The unit also has 4 digital inputs, 4 digital outputs, 4 alarm outputs, one USB host port and one USB device port. The unit also has 3 LEDs for different indications (Power, Alarm and Logging).

The OM-DAQXL comes complete with protective rubber boot, rechargeable lithium ion battery, 32 GB SD card, one plastic stylus, 1 GB USB thumb drive, 1.8 m (6') USB cable, 1.8 m (6') digital I/O cable, alarm/excitation terminal block, universal AC adaptor, screwdriver, quick start guide, set of 5 PTFE insulated Type K thermocouples, set of 5 ferrites to install on the thermocouple inputs (for noise reduction) and crimp-on ground lug. The unit can be wall mounted using the provided keyhole mount or operated on a bench using the tilt stand.

Home Screen
The home screen is the main screen of the data logger’s user interface. It is divided into 3 distinct sections as shown on the PDF.

Digital Display View
Status/Information Display:
This status bar provides information such as Battery Charge percentage, System Clock (displays current Time & Date), Lock/Unlock data logger, status of the 4 Alarm Outputs, and Logging Mode indication.

Data Display Area: This is the area where different inputs (up to 4 Channels) are displayed vs. time. The data is displayed in 4 different ways: Waveform, Waveform & Table, Table only, and Digital. In the Digital view, each channel name and number are displayed along with the value.

Navigation Toolbar: This toolbar provides access to all the functions and menus of the data logger. You can extend or retract the toolbar by pressing the Tool button. The following flow chart shows all the functionalities of the buttons of the toolbar.

Standalone Operation
The OM-DAQXL’s touch screen user interface (UI) makes configuring the data logger for operation straight forward and simple. Recorded data files can easily be reviewed and analyzed on the OM-DAQXL. For data analysis on a computer, simply transfer the data file from the SD card or USB thumb drive to the PC and open the selected data file into Excel® or other data analysis software.

SPECIFICATIONS
Screen:
7 inch, TFT, resistive touch comes with plastic stylus
Rubber Boot: Black
Analog Input Type: Thermocouple, thermistor, RTD, strain gauge, DC voltage, DC current
   Thermocouple Types: J, K, T, E, R, S, B, C, N
      Thermocouple Accuracy:
      Type J or K: ±(0.15% of rdg + 1.1°C)
      Type T, E or N: ±(0.15% of rdg + 1.7°C)
      Type R, S, B or C: ±(0.15% of rdg + 2.0°C)
   RTD Types: Pt100, Pt500, Pt1000 (0.00385 or 0.00392 curve); 2, 3 or 4-wire
      RTD Accuracy: ±(0.25% of rdg + 1°C)
   Thermistor Types: 2252Ω/10KΩ
      Thermistor Accuracy: ±1.0°C
   DC Voltage Input Ranges: ±50 mV, ±100 mV, ±1V, ±5V, ±10V, ±20V, ±50V
   DC Current Input Range: ±20 mA
      DC Voltage/Current Accuracy: ±0.1% of FS
   Strain Gauge Type: 100Ω full bridge, 350Ω full bridge
      Strain Gauge Excitation: 5V, 10V

Digital Input Type: Pulse/Frequency
   Frequency/Pulse Input: 0 to 250 KHz
   Frequency Accuracy: ±2 Hz

Sampling Rate: 125 s/sec (Max) to 1 s/hour (Min)
Maximum Sampling Rate per Number of Channels (Analog and Digital):
   1 Channel: 125 s/sec
   2 Channels: 50 s/sec
   4 Channels: 25 s/sec
   8 Channels: 10 s/sec
   16 Channels: 5 s/sec
Logging Rate: 125 s/sec (Max) to 1 s/hour (Min)
Maximum Logging Rate per Number of Channels (Analog and Digital):
   1 Channel: 125 s/sec
   2 Channels: 50 s/sec
   4 Channels: 25 s/sec
   8 Channels: 10 s/sec
   16 Channels: 5 s/sec

Excitation to Power External Transmitter: 24 Vdc @ 50 mA output–set in data session setting
Filter Options: 50 Hz, 60 Hz rejection–set in data session setting
Number of Samples for Moving Average Filter per Channel: Up to 50 samples
Math (Virtual) Channels: 8 or 16
Digital Inputs: 4 Schmitt trigger based inputs
   Range: 0 to 24 Vdc single-ended
   Logic High Threshold: 2.5V
   Logic Low Threshold: 1.5V
Digital Outputs: 4 channels, open collector, 5V @ 50 mA
Alarm Output: 4, Open collector, 30V @ 500 mA
Alarms per Channel: Two
Alarm Types: High, low, windows in, windows out, open sensor
Alarm Latching: Settable in alarm menu
On Alarm Event: Map to 4 alarm outputs, take screen shot, sound buzzer
Logging Conditions: On command or based on trigger conditions
Start and Stop Trigger Conditions: Timer, date and time, weekday and time, alarm output, external trigger
Memory:
   Internal:
1 GB
   SD Card: 32 GB
   USB Drive: 32 GB
USB Ports: One host and one device
Battery: Rechargeable lithium-ion; 7.2V @ 4.8 Ah
Battery Life: 4 to 8 hours based on display setting
DC Adaptor: 12 Vdc @ 5A
Operating Environment: 0 to 50°C (32 to 122°F), 0 to 95%RH non-condensing
General Dimensions: 28.6 L x 15.24 H x 6.35 cm D (9 x 6 x 2.5")
Weight: 1.13 kg (2.5 lbs)



Product Selection (Specify Model Number)
 Part Number   Availability   Price    Description   
 OM-DAQXL-1-NA in-stock    $1,495.00     8-channel touch screen data logger with USB communications  
 OM-DAQXL-2-NA in-stock    $2,495.00     16-channel touch screen data logger with USB communications  
 OM-DAQXL-2-SEA in-stock    $2,495.00     16-channel touch screen data logger with USB communications  
 OM-DAQXL-1-SEA in-stock    $1,495.00     8-channel touch screen data logger with USB communications  
 OM-DAQXL-2-SAA in-stock    $2,495.00     16-channel touch screen data logger with USB communications  
 OM-DAQXL-1-SAA in-stock    $1,495.00     8-channel touch screen data logger with USB communications  
 Accessories
 OM-DAQXL-RB in-stock    $15.00     Spare rubber boot  
 SD32GB in-stock    $25.75     Spare 32 GB SD card  
 OM-DAQXL-USB in-stock    $5.00     Spare USB cable, 1.8 m (6')  
 OM-DAQXL-CABLE6 in-stock    $20.00     Spare digital I/O cable, 1.8 m (6')  
 OM-DAQXL-TB8 in-stock    $5.00     Spare alarm/excitation terminal block  
 5TC-TT-K-20-36 in-stock    $55.00     Spare set of 5 Type K thermocouples with stripped leads  
 PT-USB-1 in-stock    $15.80     Spare 1 GB thumb drive  
 OM-DAQXL-RF in-stock    $3.00     Spare ferrite for thermocouple input  
 OM-DAQXL-ADAPTOR-NA in-stock    $60.00     Spare 12 Vdc, 5A power adaptor for North America  
 OM-DAQXL-ADAPTOR-SAA in-stock    $60.00     Spare 12 Vdc, 5A power adaptor for Australia  
 OM-DAQXL-ADAPTOR-SEA in-stock    $60.00     Spare 12 Vdc, 5A power adaptor for Singapore  
 OM-DAQXL-BATTERY in-stock    $85.00     Spare rechargeable battery pack  
 OM-DAQXL-STYLUS in-stock    $3.00     Spare stylus  
 
All dollar amounts on this site are shown in US currency.

 Note: The OM-DAQXL comes complete with protective rubber boot, rechargeable lithium ion battery, 32 GB SD card, one plastic stylus, 1 GB USB thumb drive, 1.8 m (6') USB cable, 1.8 m (6') digital I/O cable, alarm/excitation terminal block, universal AC adaptor, screwdriver, quick start guide, set of 5 PTFE insulated Type K thermocouples, set of 5 ferrites to install on the thermocouple inputs (for noise reduction) and crimp-on ground lug, and a Hard carrying case. The unit can be wall mounted using the provided keyhole mount or operated on a bench using the tilt stand.
 Ordering Example: (1) OM-DAQXL-1-NA 8-channel touch screen data logger with USB communications = $1495

   
Keywords: touch screen, data logger, universal logger, portable data logger

   Back to top