Vinyl Tip with Shielded-Jacketed Microphone Cable

Biological: Ideal for animal and biological applications in esophageal or rectal temperature measurement. It is also suitable for use in geographic and oceanographic applications. Design characteristics present an extremely rugged sensor assembly at a minimum cost. Leads: 300mm (12") Maximum temperature: 100°C (212°F) Body Type ON-901 $36 All prices include sensor

Model # Resistance (ohms) @ 25°C ON-901-44004 2,252 ON-901-44005 3,000 ON-901-44007 5,000 ON-901-44006 10,000 ON-901-44008 30,000

Epoxy Encapsulated Thermistor Sensor in Stainless Steel Housing with Vinyl Insulated Leads

Surface temperature readings: or control and indication. Ideally suited for applications such as: heat loss or compressor efficiency measurement and control studies of piping systems; determining manifold wall and bearing surface temperatures. Construction facilitates easy attachment to flat surfaces. Leads: 300mm (12") Maximum temperature: 100°C (212°F) Body Type ON-909 $48 All prices include sensor

Model # Resistance (ohms) @ 25°C ON-909-44004 2,252 ON-909-44005 3,000 ON-909-44007 5,000 ON-909-44006 10,000 ON-909-44008 30,000

Exposed Epoxy Coated Thermistor Sensor mounted in Open-End Stainless Steel Housing with Vinyl Shielded Jacketed Microphone Cable

ON-906 has Economical Plastic Housing. Air temperature measurement, control and indication: design characteristics offer a perfect sensor assembly for monitoring gas streams. Ideal for temperature measurement and control of remote air readings. Leads: 300mm (12") Maximum temperature: 100°C (212°F) Body Type ON-906 $50 Body Type ON-905 $55 All prices include sensor

Model # Resistance (ohms) @ 25°C ON-905-44004 ON-906-44004 2,252 ON-905-44005 ON-906-44005 3,000 ON-905-44007 ON-906-44007 5,000 ON-905-44006 ON-906-44006 10,000 ON-905-44008 ON-906-44008 30,000

Closed-End Stainless Steel Tube with Thermistor Sensor Mounted in Tip.
1/8" NPT Fitting with Vinyl Shielded-Jacketed Microphone Cable

Liquid immersion sensor assembly: rugged design and closed end construction. Ideally suited for temperature measurement, control and indication in fluids. Also for use in a wide variety of pressurized systems applications. Leads: 300mm (12") Maximum temperature: 100°C (212°F) Body Type ON-910 $55 All prices include sensor

Model # Resistance (ohms) @ 25°C ON-910-44004 2,252 ON-910-44005 3,000 ON-910-44007 5,000 ON-910-44006 10,000 ON-910-44008 30,000

Epoxy Encapsulated Thermistor Sensor in Screw Mounted Aluminum Housing with PFA Insulated Leads

Surface sensor assembly: designed for a variety of temperature measurement and control applications. It represents a low cost, fast response unit and lends itself to easy mounting on flat surfaces. Leads: 300mm (12") Maximum temperature: 100°C (212°F) Body Type ON-930 $44 All prices include sensor

Model # Resistance (ohms) @ 25°C ON-930-44004 2,252 ON-930-44005 3,000 ON-930-44007 5,000 ON-930-44006 10,000 ON-930-44008 30,000

Encapsulated Thermistor Sensor in Molded Housing with PFA Insulated Leads

Insertion sensor assembly: specifically designed for high reliability, high volume, and low cost applications where fast time response and small size are determining factors. The unit is easily affixed by inserting in a small hole for mounting. Leads: 300mm (12") Maximum temperature: 100°C (212°F) Body Type ON-940 $42 All prices include sensor

Model # Resistance (ohms) @ 25°C ON-940-44004 2,252 ON-940-44005 3,000 ON-940-44007 5,000 ON-940-44006 10,000 ON-940-44008 30,000

Stainless Steel Housing with 1/4" Hex. Head and #8-32 NC-2A Threaded Body.
Thermistor Sensor Epoxy Encapsulated in Housing with PFA Insulated Leads

Surface sensor assembly: for temperature measurement and control where design problems require stability against vibration and shock. The unit has been designed for temperature control and measurement problems where low cost and reliability are crucial. Leads: 300mm (12") Maximum temperature: 100°C (212°F) Body Type ON-950 $43 All prices include sensor

Model # Resistance (ohms) @ 25°C ON-950-44004 2,252 ON-950-44005 3,000 ON-950-44007 5,000 ON-950-44006 10,000 ON-950-44008 30,000

Closed-End Stainless Steel Tube with Thermistor Sensor Mounted in Tip. Stainless Steel Mounting Plate with (2) Two Mounting Holes Welded to Tube. PFA Insulated Leads

Model # Resistance (ohms) @ 25°C ON-960-44004 2,252 ON-960-44005 3,000 ON-960-44007 5,000 ON-960-44006 10,000 ON-960-44008 30,000 Air flow sensor assembly: designed to satisfy the many requirements of air temperature-measurement and control in Air Conditioning systems and equipment cooling systems. The unit lends itself to easy mounting to standard metal ducting. Leads: 300mm (12") Maximum temperature: 100°C (212°F) Body Type ON-960 $44 All prices include sensor

Stainless Steel Housing with 7/16" Hex. Head and 1/8-#27 NPT Threaded Body.
Thermistor Sensor Epoxy Encapsulated in Housing with PFA Insulated Leads

Model # Resistance (ohms) @ 25°C ON-970-44004 2,252 ON-970-44005 3,000 ON-970-44007 5,000 ON-970-44006 10,000 ON-970-44008 30,000 Liquid immersion fluid sensor assembly: ideal for obtaining temperature measurement and control readings in pipes or closed vessels within pressurized systems. Threaded hex. head design affords greater resistance to shock and vibration when mounted. Leads 12" standard, other lengths available, consult factory. Leads: 300mm (12") Maximum temperature: 100°C (212°F) Body Type ON-970 $55 All prices include sensor

NOTE: NEWPORT ’s Precision Interchangeable Probes are normally constructed with ±0.2°C Interchangeable Thermistors. These are Types 44004, 44005, 44007, 44006 and 44008. If assemblies are required with ±0.1°C Interchangeable Probes, change the portion of the model number designation to reflect the ±0.1°C Thermistor.
Example: ON-901-44004 becomes ON-901-44033. Add $11 to the designated Model price for ±0.1°C Interchangeable Thermistors. Interchangeable Thermistors with ±0.1°C interchangeability are Types 44033, 44030, 44034, 44031 and 44032