NEWPORT® Self-Sealing Plugs will allow you to take pressure
and temperature readings quickly and eliminate the need
for leaving costly gauges or temperature indicators on the
line. The NEWPORT® plug is permanently installed in the
line at recommended test points. The cap protects the valve
and provides an additional positive seal. After the cap
has been removed, either a test thermometer or a gauge adaptor
with the proper pressure gauge attached can be inserted
through the two self-closing valves in the plug. Readings
are taken, adjustments or tests can be made, and when the
probes are withdrawn, the two valves close. The protective
cap is then reinstalled.
Neoprene is resistant to deterioration from waxes, oils,
greases, fats, petroleum products, and most refrigerants.
Can be operated at a maximum temperature of 95°C (200°F)
at 500 psig.
Nordel gives excellent service in hot or cold water and
in some applications of low pressure steam. Nordel is resistant
to detergents, phosphates, esters, ketones, alcohols, and
glycols. It is not suitable for petroleum products. Can
be operated at a maximum temperature of 135°C (275°F) at
500 psig.
Gauge
Adaptor
THE PRESSURE GAUGE ADAPTOR HAS A 3 mm (1/8") DIAMETER
PROBE OF 304 STAINLESS STEEL WITH UNION NUT. SIMPLY ATTACH
YOUR GAUGE/ TRANSDUCER AND INSERT THE PROBE THROUGH AN NEWPORT®
PLUG TO TAKE A READING.
