General Purpose RTD Probes
Type PR-10
| This
general purpose RTD probe transitions directly to 36"
lead wires without the use of a metal transition fitting.
This design makes for a more compact probe when space
limitations are a factor. Note that the point where
the lead wire exits the probe sheath will not be as
durable as on the PR-11 probe, which uses the metal
transition and spring as strain relief. |
|
|
|
General Purpose RTD Probes
|
Model No.
1/8" Dia.
|
Model No.
3/16" Dia.
|
Model No.
1/4" Dia.
|
Lead
Style†
|
Ohms
at 0°C
|
Sheath
Length**
|
|
|
PR-10-2-100-1/8-6-E
|
PR-10-2-100-3/16-6-E
|
PR-10-2-100-1/4-6-E
|
2
|
100
|
6"
|
|
PR-10-2-100-1/8-12-E
|
PR-10-2-100-3/16-12-E
|
PR-10-2-100-1/4-12-E
|
2
|
100
|
12"
|
|
PR-10-2-100-1/8-18-E
|
PR-10-2-100-3/16-18-E
|
PR-10-2-100-1/4-18-E
|
2
|
100
|
18"
|
|
PR-10-2-100-1/8-24-E
|
PR-10-2-100-3/16-24-E
|
PR-10-2-100-1/4-24-E
|
2
|
100
|
24"
|
* Specify probe diameter (inches): 1/8,
3/16 or 1/4.
| |
Custom
RTD Probes
Custom Designs Available for Any “Off-the-Shelf” Product
|
| NEWPORT
offers the most extensive and sophisticated custom engineering
capability in the industry. Whether you need a simple modification
of a standard item, or a complete customized design, NEWPORT
can accommodate your request. New temperature products that
until now were only available as custom assemblies are being
offered as standard products because so many customers like
yourself have asked for them. In fact, many of NEWPORT’s current
products were developed as the result of repeated customer requests.
With the expertise and commitment of the Custom Engineering
Department, your ideas today can become the products of tomorrow. |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) PR-10-2-100-1/4-12-E RTD probe, lead type 2 (3-wire configuration), 100 ohms, 1/4" dia. SS sheath 12 inches long, with 36" PFA insulated leads terminating in stripped ends, European curve (alpha = 0.00385) = $63
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
 |
|
|
|
|
Option Descriptions
|
|
(1)
|
RTD Lead Wire Style
|
| |
Select
2 for 3-wire
1 for 2-wire
3 for 4-wire (min 3/16" OD)
|
(2)
|
Nominal Element Resistance (@0°C)
|
| |
Select
100 for 100 ohm
|
(3)
|
Probe Diameter
|
| |
Select
1/8 for 1/8 inch
3/16 for 3/16 inch
1/4 for 1/4 inch
|
(4)
|
Sheath Length
|
| |
Select
6 for 6 inch
12 for 12 inch
18 for 18 inch
24 for 24 inch
|
(5)
|
RTD Curve
|
| |
Select
E for European 0.00385
A for American 0.00392
|
(6)
|
Options
|
| |
Select
Nothing(leave field blank) for none (standard construction)
-ST for shrink tubing strain relief
|
| NOTE: All combinations may not be valid, check spec sheet for valid part numbers. |
| | | | |
|
|
 |
|
|
|
|
Keywords: General Purpose RTD Probes Custom RTD Probes
|
Back to top |
|
|
