|
|
Same Quality Product – New Name!
We’re building a stronger, unified brand so we can provide you with the best products in the industry. To do this, the Newport branded products will now be Omega branded starting July 15, 2018. You can expect the same support and quality as always, and of course the same features and specs, just with a new part number and logo. Please refer to Platinum products, CNPT Controller & DPPT Digital Meter at omega.com for details.
The Industry Leading PLATINUM Series family of
microprocessor-based digital panel
meters offer unparalleled flexibility
in process measurement. While
extremely powerful and versatile,
great care has gone into designing
a product that is very easy to set-up
and use. The automatic hardware
configuration recognition eliminates
the need for jumpers and allows the
firmware to automatically simplify
itself, eliminating all menu options
that do not apply to a specific
configuration.
Each unit allows the user to select
the input type from 9 thermocouple
types (J, K, T, E, R, S, B, C, and N),
Pt RTDs (100, 500, or 1000 Ω, with
either 385, 392, or 3916 curve),
thermistors (2250 Ω, 5K Ω, and
10K Ω), DC voltage, or DC current, and Strain & Bridge Inputs.
The bipolar voltage or current inputs
are fully scalable to virtually all
engineering units, with a selectable
decimal point that is perfect for
use with pressure, flow, or other
process input.
Two alarms can be configured
for above, below, hi/lo, and band
triggering using either absolute
or deviation alarm trigger points.
In addition, high-high/low-low
indication is available. The two
optional single pole double throw
mechanical relays can be assigned
to either or both alarm triggers.
Two annunciators and three display
colors can also be assigned to the
alarm triggers.
The PLATINUM Series device
features a large, 3-color, 9 segment
programmable LED display with
the capability to change color and/
or change the state of designated
outputs every time an alarm is
triggered. Now 6-digit display is available.
The universal power
supply accepts 90 to 240 Vac. The
low voltage power option accepts
24 Vac or 12 to 36 Vdc.
Embedded Ethernet and Serial Communications
Optional embedded ethernet on
the 1⁄16 and 1⁄8 DIN models allow
the units to connect directly to an
ethernet network and transmit
data in standard TCP/IP packets,
or serve web pages over a LAN
or the internet. Optional serial
communications are also available
configurable as RS232 or RS485,
with straightforward ASCII
commands or MODBUS®. All three
types of communications interfaces
(USB, ethernet, and serial) can be
installed and active simultaneously.
Specifications
Inputs
Input Types: Thermocouple, RTD, thermistor, analog voltage, analog current, strain & bridge inputs
Current Input: 4 to 20 mA, 0 to 24 mA scalable
Voltage Input:±100 mV, ±1 V, ±10 Vdc scalable
Thermocouple Input (ITS 90): K, J, T, E, R, S, B, C, N
RTD Input (ITS 90): 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; 0.00385, 0.00392 (100 Ω only), or 0.003916 (100 Ω only) curves
Thermistor Input: 2252 Ω, 5K Ω, 10K Ω
Strain Input: ±100 mV, ±50 mV
Excitation: Firmware selectable (no jumpers to set) to 5, 10, 12, and 24 Vdc @ 25 mA (24V for AC Units Only)
Configuration: Differential
Polarity: Bipolar
Resolution: 0.1° temperature; 10 μV process
Input Impedances:
Process Voltage: 10M Ω for ±100 mV, 1M Ω for other voltage ranges
Process Current: 5 Ω
Thermocouple: 10K Ω max
Temperature Stability:
RTD: 0.04°C/°C
Thermocouple @ 25°C (77°F): 0.05°C/°C (cold junction compensation)
Process: 50 ppm/°C
A/D Conversion: 24-bit sigma delta
Reading Rate: 20 samples per second
Digital Filter: Programmable from 0.05 seconds (filter = 1) to 6.4 seconds (filter = 128)
CMRR: 120 dB
Setpoint Adjustment: 4 Digit (-9999 to +9999 counts); 6 Digit (-99999 to +999999)
Warm-Up to Rated Accuracy: 30 mins
Alarm outputs (optional)
Isolated Analog output (optional): Retransmission only
SPDT Relay: Single pole, double throw mechanical relay, 250 Vac or 30 Vdc at 3 A (resistive load)
Communications (USB Standard , Optional Serial and Ethernet)
Connection:
USB: Female micro-USB
Ethernet: Standard RJ45
Serial: Screw terminals
USB: USB 2.0 host or device
Ethernet Standards Compliance: IEEE 802.3 10/100 Base-T auto-switching, TCP/IP, ARP, HTTPGET
Serial: Software selectable RS232 or RS485; programmable 1200 to 115.2 K baud
Protocols: Omega ASCII, Modbus ® ASCII/RTU
Isolation
Approvals: UL, cUL, CE
Power to Input/Output: 2300 Vac per 1 min test; 1500 Vac per 1 min test (low voltage/power option)
Power to Relays/SSR Outputs: 2300 Vac per 1 min test
Relays/SSR to Relay/SSR Outputs: 2300 Vac per 1 min test
RS232/RS485 to Inputs/Outputs: 500 Vac per 1 min test
Input Type | Description | Range | Accuracy |
Process/Strain | Process Voltage | ±50 mV, ±100 mV, ±1, ±10 Vdc | 0.03% FS |
Process | Process Current | Scalable within 0 to 24 mA | 0.03% FS |
J | Iron-Constantan | -210 to 1200°C (-346 to 2192°F) | 0.4°C (0.7°F) |
K | CHROMEGA®-ALOMEGA® | -270 to -160°C (-454 to -256°F) -160 to 1372°C (-256 to 2502°F) | 1.0°C (1.8°F) 0.4°C (0.7°F) |
T | Copper-Constantan | -270 to -190°C (-454 to -310°F) -190 to 400°C (-310 to 752°F) | 1.0°C (1.8°F) 0.4°C (0.7°F) |
E | CHROMEGA®-Constantan | -270 to -220°C (-454 to -364°F) -220 to 1000°C (-364 to 1832°F) | 1.0°C (1.8°F) 0.4°C (0.7°F) |
R | Pt/13%Rh-Pt | -50 to 40°C (-58 to 104°F) 40 to 1788°C (104 to 3250°F) | 1.0°C (1.8°F) 0.5°C (0.9°F) |
S | Pt/10%Rh-Pt | -50 to 100°C (-58 to 212°F) 100 to 1768°C (212 to 3214°F) | 1.0°C (1.8°F) 0.5°C (0.9°F) |
B | 30%Rh-Pt/6%Rh-Pt | 100 to 640°C (212 to 1184°F) 640 to 1820°C (1184 to 3308°F) | 1.0°C (1.8°F) 0.5°C (0.9°F) |
C | 5%Re-W/26%Re-W | 0 to 2320°C (32 to 4208°F) | 0.4°C (0.7°F) |
N | Nicrosil-Nisil | -250 to -100°C (-418 to -148°F) -100 to 1300°C (-148 to 2372°F) | 1.0°C (1.8°F) 0.4°C (0.7°F) |
RTD | Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω | -200 to 850°C (-328 to 1562°F) | 0.3°C (0.7°F) |
RTD | Pt, 0.003916, 100 Ω | -200 to 660°C (-328 to 1220°F) | 0.3°C (0.7°F) |
RTD | Pt, 0.00392, 100 Ω | -200 to 660°C (-328 to 1220°F) | 0.3°C (0.7°F) |
Thermistor | 2252 Ω | -40 to 120°C (-40 to 248°F) | 0.2°C (0.35°F) |
Thermistor | 5K Ω | -30 to 140°C (-22 to 284°F) | 0.2°C (0.35°F) |
Thermistor | 10K Ω | -20 to 150°C (-4 to 302°F) | 0.2°C (0.35°F) |
Accessories
Use the optional PT-USB-CABLE for a NEMA4 rated panel mount USB connector.
A 12" (304mm) length cable connects from USB port of Platinum controller to your control panel. This accessory includes a protective end cap when not in use.
The PT-USB-ADAPTER, which is supplied with each unit, can be plugged into the controller and be used with a standard USB 2.0 memory stick.
|
|
 |
The PT-USB-1 1 GB USB thumbdrive has a standard USB connector on one end and a micro-USB connector on the other end. It is convenient for transferring files between your PC and your PLATINUM unit.
|
|
 |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with quickstart manual with downloadable operator’s manual. Free DASHBOARD software can be downloaded for use with a PC to log data from the unit on the PC via any installed communications channel.
All units come with USB communications standard, but the Ethernet communications option is not available on 1/32 DIN models.
For Calibration: when ordering a CAL-3, default input is K type T/C in degree C. Please contact sales if other input types are needed
|
|
|
|
|
Keywords: Panel Meters, Panel Meter, Temperature Meter, Process Meter, Temperature Meters, Process Meters, Alarm, Strain Meter
|
Back to top |
| |