Special
Application Tip Probes Quick Disconnect and Integral Handle
Styles
Made from Special Limits of Error Material
QD / HPS
QD-NP-K-316G-12 penetration probe
shown with SDX-UST-K-SMP-M handle
|
| Features |
 |
Perfect
for Handheld Meters |
|
12"
Probe Length Standard |
|
Quick
Disconnect Probes Supplied with Mating Connector
and Cable Clamp |
|
Handle
Probes have 1' Retractable Cable |
|
Cable–Expands
to 5'! SMP Miniature Male Connector Termination
Standard |
QD
probes have a standard size quick disconnect termination,
and can be used with either SDX type ABS plastic or HDX
type rugged aluminum handles.
HPS probes feature an
ABS plastic handle and retractable cable permanently attached to the probe.
|
|
 |
| Model
No. |
Probe
Type
|
|
QD-NP-(*)-316G-12
|
Quick
Disconnect
|
|
HPS-NP-(*)-316G-12
|
Integral
Handle
|
*Specify Calibration: J, K, E, or T.
Conical tip for insertion into soft and semi-frozen material.
Made from 3/16" O.D. 304 SS. 12" length, grounded
junction. Tip rated to 1650°F (900°C). |
| Model
No. |
Probe
Type
|
|
QD-RT-(*)-18G-12
|
Quick
Disconnect
|
|
HPS-RT-(*)-18G-12
|
Integral
Handle
|
*Specify Calibration: J, K, E, or T.
Special reduced diameter 1/16" tip
designed for fast response. Rugged 1/8" O.D. 304 SS sheath. 12" length,
grounded junction. Tip rated to 1650°F (900°C). |
| Model
No. |
Probe
Type
|
|
QD-FSP-(*)-14E-12
|
Quick
Disconnect
|
|
HPS-FSP-(*)-14E-12
|
Integral
Handle
|
*Specify Calibration: J, K, E, or T.
Flexible
tip conforms to most surfaces for fast, repeatable,
accurate measurements. Made from RTV silicone rubber
for good thermal contact. 1/4" O.D. 304 SS sheath.
12" length, exposed junction. Tip rated to 500°F (260°C).
Note: subjecting sensor tip to temperatures above
600°F (315°C) will result in tip damage. |
| Model
No. |
Probe
Type
|
|
QD-AP-(*)-316E-12
|
Quick
Disconnect
|
|
HPS-AP-(*)-316E-12
|
Integral
Handle
|
*Specify Calibration: J, K, E, or T.
Exposed
element protected by 3/16" O.D. 304 sheath. Drilled
end exposes bead to airflow for fast measurements.
Constant diameter for easy insertion or mounting into
duct work. 12" length, exposed junction. Rated to
1600°F (870°C). |
|
|
 |
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Other lengths and diameters are also available. Consult Custom Engineering for details.
Ordering Example: (1) HPS-RT-K-18G-12 reduced tip fast response probe, type K, integral handle style = $50
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
 |
|
|
|
|
Option Descriptions
|
|
(1)
|
Handle Type
|
| |
Select
QD for Quick Disconnect
HPS for Integral Handle
|
(2)
|
Probe Type
|
| |
Select
NP for Penetration Probe (3/16" OD grounded junction)
FSP for Flexible Tip Surface Probe (1/4" exposed junction)
RT for Fast Response Probe (1/8" OD grounded junction)
AP for Air Probe (3/16" OD exposed junction)
|
(3)
|
Calibration Type
|
| |
Select
J for Type J (Iron-Constantan)
K for Type K (CHROMEGA-ALOMEGA)
E for Type E (CHROMEGA-Constantan)
T for Type T (Copper-Constantan)
|
(4)
|
Sheath Diameter
|
| |
Select
316 for 3/16 Inch (NP & AP types)
14 for 1/4 Inch (FSP type)
18 for 1/8 Inch (RT type)
|
(5)
|
Thermocouple Junction
|
| |
Select
G for Grounded (NP & RT types)
E for Exposed (FSP & AP types)
|
| NOTE: All combinations may not be valid, check spec sheet for valid part numbers. |
| | | |
|
|
 |
|
|
|
|
Back to top |
|
|