Thermistor Probes Mating with Heav Duty HDX Handles and Standard Size Connectors, Models THX-400-GP-(*),THX-400-NP-(*), and THX-400-AP-(*), 2252 Ohm

Thermistor Probes Series "400" For Use with Heavy Duty* HDX Handle
THX

The NEWPORT® HDX Handle must have an uncompensated OST connector and copper extension cord. For use with thermistor probes.

SPECIAL ASSEMBLIES AVAILABLE!
Other thermistor elements, sheath lengths and configurations are available upon request. Consult the Sales Department for quotation or send sketch.

*Alternatively use mating female connector OST-U.

General Purpose Probe
Model - THX-400-GP-12
Basic Unit $70

The THX-400-GP probe used with an HDX handle is ideal for general purpose immersion measurement in gases and liquids. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath 12" (304 mm) long, the probe will adapt to most process applications. A high precision 44033 thermistor element is used (2252 ž @ +25°C), which provides 0.1°C interchangeability and a temperature range of -40 to 100°C (-40 to 212°F).

Air Probe
Model - THX-400-AP-12
Basic Unit $90

The THX-400-AP is designed for HVAC applications. The small diameter sheath and radiant energy shield easily fit into duct work, grilles and vents. The probe will work with the NEWPORT® HDX handle or can be permanently mounted using OMEGALOK® compression fittings. Made from a rugged 3/16" (4.8 mm) O.D. 304 stainless steel sheath 12" (304 mm) long, the tip is perforated to expose the thermistor bead to air flow for fast, accurate measurements. The 44033 precision thermistor element is rated up to 100°C (212°F).

Penetration Probe
Model - THX-400-NP-12
Basic Unit $80

The THX-400-NP probe used with an HDX handle will easily pierce soft and semi-frozen material as well as soil and sand. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath 12" (304 mm) long. A high precision 44033 thermistor element is used which provides 0.1°C interchangeability and a temperature range of -40 to 100°C (-40 to 212°F).