Strips ALL Insulations... PFA... NYLON... RUBBER...NEOPRENE... VINYL... PLASTICS Features Thermal wire stripping to highest industrial standards Long life, low-cost blade is easily replaced Ruggedly built for production use Self-contained, handheld Designed especially for electronic assembly to aerospace standards, the STRIPALL wire stripper combines high production rates with consistently high wiring reliability. It is especially valuable when working with fine gage wire. Each unit has adjustable strip and wire-gage stops. The rugged alloy blades have a long life under demanding production schedules. They heat to temperatures of 1700°F (926°C) in less than two seconds. They also cool instantly, eliminating the need for special racks or holding clips and providing complete operator safety.

Completely self-contained, the standard STRIPALL wire stripper uses no external transformer or power supplies. The compact, solid state Temperature Control Unit supplied with some models is used to reduce blade temperature for certain insulation materials that burn, scorch or emit fumes when touched by the 1700°F (926°C) blade temperature.

Because of the unique gage stop, adjustable from #5 to #38 AWG, the blades of the STRIPALL wire stripper do not exert any pressure on the conductor itself. In addition to positively eliminating nicks or deformation, this feature also protects the remaining insulation against damage, since the wire itself is not heated. The cut is clean and square, and no sleeving is melted into the wire strands. Insulation is easily cut at any predetermined point, and the unwanted slug is quickly removed. Wire ends are ready instantly for soldering or other means of connection.

TBM Bench Fixture

Model TW-1: “Standard” Model
For general production work. Completely self-contained. Has adjustable stops for both wire gage and strip length . Price: $371; for 220V TW-1 220 $420

Model TWC-1: Controlled Temperature
Has solid state temperature control. Temperature adjustable from 100°F (38°C) to above 1700°F (926°C). Solid state control mounts as electrical outlet, eliminating bench clutter. Blades reach selected temperature in less than two seconds. Price: $475; for 220V TWC-1 220 $513

Model TW-2LN: Long Nose
Strips up to 3.5" (90mm) in a single stripping action. Same operating features as the TW-1, except unit has four extra-long electrodes. Useful for stripping in inaccessible areas. Price: $392; for 220V TW-2HV: $433

Model TW-6: Cable Stripper
Designed especially for slitting and removing the outer coverings of cables. Removes Telflon® as well as low-temperature coaxial coverings. For coax cable or wire diameters 5/8" (15.8 mm) or less. Price: $494; for 220V TW-6 220 $515

Model TWC-6: Controlled Temperature
Same as the TW-6, but includes temperature control unit for adjustments from 100°F (38°C) to above 1700°F (926°C). Price: $570; for 220V TWC-6 220 $597

Note: Temperature control unit included with TWC-1 and TWC-6. Temperature control unit is also available for all other models. Order Model Number TC-1. Price: $145

HIGH VOLTAGE STRIPALL WIRE STRIPPERS
All models are available for operation on 220 volt ac, 50 Hz line voltage. For high voltage models add "220" to the end of the model number.

ACCESSORIES
Model TBM Bench-Mounting Fixture
For holding any STRIPALL wire stripper in fixed work position. Stripper can be removed from fixture when handheld operation is desired. Price: $36

Replacement Blades
To order notched replacement blades for all two-blade models, specify model number RBN. Price: $7.30/pair

Unnotched replacement blades for use on fine gage wire 26 to 38 AWG can be ordered as model number RVUN.
Price: 7.30/pair

To order a replacement blade for Models TW-6 and TWC-6, use model number RBN-6-TW6. Price: $26.50/unit

Note: All Units supplied with 1 pr. blades for 5 to 25 AWG (RBN) installed.