Navigation image map
Contact Us Distributor Site Map Manuals Home Products

Industrial Thermowells and Thermocouple Assemblies
Type 2 / Type 3 / Type 4
NEWPORT® offers the industrial and research user a complete line of thermocouple assemblies. NEWPORT’s standard types are listed in this section, which includes a wide selection of component parts, partial assemblies, and complete assemblies ready for installation. Many other styles of components and assemblies are also available. NEWPORT is always glad to quote based on your special needs.

Thermocouple Extension Assemblies
Selection of thermocouple heads is made on the basis of operational requirements, accessibility, and/or the need to avoid direct contact with hot surfaces. Also, it is often required that the extension permit removal of the thermocouple element. For these requirements, NEWPORT offers a complete line of configurations and component parts which can be configured for specific applications. NEWPORT® extensions are made of 1/2" NPT standard weight galvanized steel nipples and unions.
Type 2 Nipple Extension
A Type 2 assembly is used to connect the head to a thermowell. The length is measured from the bottom of the head to the top of the well. Available assembled in lengths of 0", 1/2" (13mm), 1" (25.4 mm), 1/1/2" (38 mm), 2" (51 mm), 2 1/2" (64 mm), 3" (76 mm), 4" (102 mm), and 5" (127 mm).
Specify: Type 2-(length)

Type 3 Nipple Union Extension
A Type 3 assembly uses a nipple and a union to connect a head with the male thread of a protection tube or fitting on a ceramic tube. Available assembled in lengths of 2" (51 mm), 2 1/2" (64 mm), 3" (76 mm), 3 1/2" (89 mm), 4" (102 mm), 4 1/2" (114 mm), 5" (127 m), 6" (152 mm), and 7" (178 mm).
Specify: Type 3-(length)

Type 4 Nipple Union Nipple Extension
A Type 4 assembly consists of a union and two nipples, one threading into the head and one into the thermowell. This type permits easy removal of the head and element from the well. Available assembled in lengths between 2" (51 mm) and 12" (305 mm).
Specify: Type 4-(length)

Non-Standard Extensions
Pricing:
Add $2 for each additional 6" (152 mm) or fraction thereof up to 48" (1219 mm). Over 48", consult Sales Department.
Ordering Example: Type 2-12 indicates Type 2 extension with 12" (304 mm) length. Pricing for standard Type 2 is $5, additional 7" (178 mm) nipple length is $4, for a total price of $9.

All dollar amounts on this site are shown in US currency.


   
Keywords: Industrial Thermowells and Thermocouple Assemblies

   Back to top
Sitemap | Careers | About Us | ISO 9001 | 1-800-NEWPORT
© Copyright 2003-2014 OMEGA Engineering inc. • Terms and Conditions