Hi-Temperature
Inconel Overbraided Ceramic Fiber Insulated Thermocouples
XCIB
|
| Features |
 |
High
Temperature Ceramic Insulation with Inconel Overbraid
|
|
Flexible,
Abrasion Resistant |
|
Withstand
Temperatures up to 1090°C (2000°F) |
|
Unexcelled
Oven and Furnace Profiling |
|
Five
Convenient Styles for Easy Application |
|
J,
K, or E Thermocouple Calibrations |
Unique
NEWPORT® family of high temperature types J,
K, or E thermocouples are double-protected with abrasion-resistant
Inconel overbraid with high temperature ceramic fiber
insulation. A temperature rating of 980°C (1800°F)continuous
service and 1090°C (2000°F) short-term service makes these
products ideal for many high temperature measurement applications.
|
They
are unexcelled for profiling ovens and furnaces. The 20-gage
solid conductor thermocouple wires are insulated with braided
Nextel® ceramic fiber. Over the ceramic fiber
is a rugged overbraid of Inconel 600®–a tough,
high-temperature, high nickel content alloy. Five convenient
styles are available in 3 ft. and 10 ft. lengths for high
temperature measurement applications.
Specifications
Wire Gage: 20 gage solid– standard limits of error
Insulation: Nextel® ceramic fiber
Overbraiding & Fittings: Inconel 600®
Temperature: 980°C (1800°F) continuous,1090°C (2000°F)
short-term service, depending on thermocouple type.
Termination: Ceramic beaded leads with compensated
spade lugs, NEWPORT® OST 220°C (425°F) male connector,
or NEWPORT® NHXH high temperature 650°C (1200°F)
ceramic male connector
Style 1
Style 1 is a grounded junction thermocouple with the
Inconel overbraid welded to form a smooth rounded
tip for all general purpose applications.
Style 2
Style 2 is a general purpose, bead welded, exposed
junction thermocouple.
Style 3
Style 3 is an exposed, bead welded junction thermocouple
with an Inconel collar to clamp the probe to a surface,
or to secure it into a hole or any fabrication.
Style 4
Style 4 is grounded. It can be bolted to a surface,
or the Inconel eye can hook the thermocouple to a
conveyor flight.
Style 5
Style 5 has an Inconel air hood to protect the exposed
beaded wire junction. This design can be clamped to
a surface, hooked to a conveyor flight, or bolted
to a surface by using the through hole at the open
end of the hood. |
|
|
|
 |
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: To order probe with calibration data at specified temperatures, add prefix "CAL-" to model number. Consult sales for cost and delivery.
Ordering Example: (1) XCIB-K-1-1-3 XCIB probe, style 1 (general purpose), type K, termination type 1 (ceramic beaded leads with spade lugs), 3 ft length = $45
|
|
 |
|
|
|
|
 |
 |
 |
 |
Part Number Builder |
|
|
|
|
 |
|
|
|
|
Option Descriptions
|
|
(1)
|
Thermocouple Calibration
|
| |
Select
J for J (Iron-Constantan)
K for K (CHROMEGA®-ALOMEGA®)
E for E (CHROMEGA®-Constantan)
|
(2)
|
Probe Style
|
| |
Select
1 for Grounded Welded Junction
2 for Exposed Junction
3 for Exposed Junction with Collar
4 for Bolt-on Junction
5 for Air Hood Junction
|
(3)
|
Termination
|
| |
Select
1 for Ceramic Beaded Leads with Spade Lugs
2 for OST standard male connector
3 for NHXH standard size ceramic male connector
4 for Nextel Insulated Leads with Spade Lugs
5 for Stripped leads
6 for SMPW miniature male connector
7 for SHX miniature ceramic male connector
|
(4)
|
Length
|
| |
Select
3 for 3 Feet
10 for 10 Feet
|
| NOTE: All combinations may not be valid, check spec sheet for valid part numbers. |
| | |
|
|
 |
|
|
|
|
Back to top |
|
|
