|
|
A Complete Wireless System Requires At Least:
Case 1: One NEW End Device (ZW-ED), One Digital Probe (zTPx-P, ZTHPx-P or zBTx-P) and One NEW Coordinator/Receiver (ZW-REC). (Recommended)
Case 2: One zSeries End Device (zED-x-P, zED-x-LCD, zED-x-CCELL, zED-x-DC or zED-x ) and One NEW Coordinator/Receiver (ZW-REC).
The long range, high-performance, low
power consumption, NEWPORT® ZW-REC wireless
receiver provides web-based
monitoring of all of NEWPORT's IEEE
802.15.4, 2.4GHz compatible wireless
transmitters.
The ZW-REC is designed to communicate
up to 1000 m* (3280') to various
wireless sensors including the
new zwSeries. The ZW-REC connects
directly to an Ethernet network
to serve active web pages and
display the data. You can monitor
and record temperature, humidity and barometric pressure over an
Ethernet network or the internet
with no special software—just
your web browser. NEWPORT offers
a variety of wireless
sensors and transmitters supporting a wide range of application requirements.
The ZW-REC can connect
to up to 128† remote transmitters.
The built-in web server supports
encryption to protect your sensitive
data. Email alarms can be sent
using OMEGA Dashboard. The
ZW-REC can also wirelessly update
firmware for compatible devices.
* Without obstructions or interferences.
† Requires sensors that support IDs 32 to 128.
SPECIFICATIONS
Ports and Features
Ethernet: RJ45, 10/100 Base-T
USB: Micro-USB 2.0 Type B
LEDs: Power; Diagnostics; Network Link; Activity
Encryption: Up to 2048 bit
Users: Client and Administrator
IP Address: Static or DHCP
Compatible Wireless
Transmitters
zwSeries: Up to 128 End Devices
zSeries: Up to 32** end devices
**These devices limited to 32 total per network.
Environmental
0 to 70°C (32 to 158°F), 90% RH non-condensing
General
Agency Approval: ECCN 5A992; EMC 2014/30/EU; LVD 2014/35/EU; RED 2014/53/EU; FCC ID TYOJN5168M5
Software: Compatible with the OMEGA® Dashboard
Note: Because of transmission frequency regulations, the ZW series products may only be used in the United States, Canada and Europe for now.
A Complete Wireless System Requires At Least:
Case 1: One ZW End Device (ZW-ED), One Digital Probe (zTPx-P, ZTHPx-P or zBTx-P) and One ZW Coordinator/Receiver (ZW-REC). (Recommended)
Example: 3 ZW-ED, 3 zTP1-P and 1 ZW-REC for a 3 zone wireless temperature measurement system
Case 2: One zSeries End Device (zED-x-P-H2, zED-x-LCD-H2, zED-x-CCELL-H2, zED-x-DC-H2 or zED-x) and One ZW Coordinator/Receiver (ZW-REC).
Example: zED-TP1-P-H2 and ZW-REC for a complete wireless temperature transmitter system
|
|
† All dollar amounts on this site are shown in US currency.
Note: * For UW Series transmitter ordering information, please go to UWTC/RTD Series for details.
|
|
|
|
|
Keywords: Wireless Receiver, Wireless transmitter, ethernet, internet, Wide Range, Ethernet or Internet Connection, SSL Encryption, Data Assurance, Data Security, zw-Series, zwSeries
|
Back to top |
| | |