The iFPX series has been discontinued.
The NEWPORT® iFPX Internet Counter puts “dumb” data on the World Wide Web. This revolutionary technology transmits virtually
any conventional counting application up to 500 KHz over an Ethernet network or the Internet.
The iFPX (Internet Frequency Pulse Transmitter) can count contacts from the simplest button or switch, as well as count pulses from most any conventional
transducer such as a proximity sensor or quadrature encoder. The iFPX converts raw data to intelligent information.
The iFPX can be configured as a virtual version of most any Rate/Frequency Meter, Totalizer, or Batch Controller. It is a node
on an Ethernet network with a unique IP address and serves the data to any authorized computer on a LAN, WAN or the Internet.
Set points can be programmed to trigger an alarm and even send email automatically to a Web-enabled cell phone.
No special software or drivers are required. A user can type the unit’s IP address (or assigned name) on the address
line of a Web Browser such as Internet Explorer. The device then serves actual JAVA based active Web pages that present
the information numerically and graphically.
The iFPX supports the common Ethernet/Internet Protocols: TCP, UDP, ARP, Telnet, DHCP, DNS, and HTTP. The device integrates
seamlessly with data acquisition and industrial automation programs. The iFPX offers password protection for security.
The iFPX provides two (2) discrete input/output channels. For applications that use two inputs, it can perform calculations
with the data from channels A and B that can be presented numerically or graphically, such as charting position on an XY graph.
The iFPX is offered as a PC board for OEM applications, and as a stand-alone device suitable for industrial or commercial applications.
iServer products are designed and manufactured in the U.S.A..
Dual Input A and B: Min. Low level signal input (magnetic pickups): 120 mV
Open Collector NPN: Max. current source: 1.66 mA
Open Collector PNP: Max. current sink: 5 mA
TTL/CMOS Input: Low <=0.8 V, High >=3.5 V (For Input: 1 Hz to 30 KHz);
Low <=0.8 V, High >=10 V (For Input: 1 Hz to 60 KHz)
Frequency: Range = 1 Hz to 100 KHz
Max. Input Frequency: Input Level: 0-5 V: 50KHz; Input Level: 0-12 V: 100KHz
Frequency Resolution: 1Hz to 100 KHz / 0.0000000001 Hz
Totalizer: Range = 0 to 999999999*
Totalizer Accuracy: 0.3%
A-B Totalize/Frequency: (A input used with B input): Could be A+B, A-B, AxB, A/B
Range = -999999999 to 999999999*
Batch: Similar to Totalizer except the Batch = 0 to 65535
Quadrature: Range = -999999999 to 999999999* *Resolution is 1 count
Output A and B: Open-collector transistors, rated 150mA sink, 30V. For external supply.
Dielectric strength per 1 minute test based on EN 61010
iFPX-W: Power to ethernet: 1500 Vrms
Power to input/output: none
Input/output to ethernet: 1500 Vrms
iFPX-D: Power to ethernet: 1500 Vrms
Power to input/output: 1500 Vrms
Input/output to ethernet: 1500 Vrms
Input Impedance: 1M ohm to +EXC 5V
Excitation: 5V at 25mA (per channel)
Debounce Time: programmable
Gate Time: programmable
Interface: Ethernet 10Base-T
Protocols: TCP/IP, UDP/IP, ARP, ICMP, DHCP, DNS, HTTP, Telnet
Indicators (LED’s): Power, Network Activity, Network Link and Diagnostics
Memory: 512 Kbyte Flash, 16 Kbyte SRAM
Management: Embedded Web server, Telnet login, Serial login
Embedded Web Server: Serves dynamic Web pages and Java applets (256 Kbyte capacity)
Power Input - iFPX-W: 9 Vdc @ 200 mA
Safety Qualified ac/dc power adapter with 9Vdc @ 0.5A min, included.
Power Input - iFPX-D: 10-32 Vdc
Consumption: 2 W max.
(DC Power supply sold separately iDRN-PS-1000)
Power Input - iFPX-PCB: 5 Vdc @ 150 mA
Operating Temperature: 0 to 70°C (32 to 158°F)
Storage Temperature: -40 to 125°C (-40 to 257°F)
Relative Humidity: 90% @ 40°C non-condensing
Material - iFPX-W: Metal case with flange mount
Dimensions: 20.8H x 61.6W x 90.3D mm (0.83 x 2.93 x 3.56 in)
Weight: 180 g (0.4 lbs.)
Material - iFPX-D: Polycarbonate case with DIN Rail mount
Dimensions: 90.2H x 25.1W x 115.0D mm (3.54 x .99 x 4.53 in)
Weight: 113 g (0.25 lbs.)
Material - iFPX-PCB: FR-4
Board Surface area: approximately 76 sq mm (3 sq inches)
Weight: 23 g (0.05 lbs.)
Universal ac Power Adapter
|† All dollar amounts on this site are shown in US currency.
|Keywords: Rate, Frequency, Pulse, Total, Batch, and Quadrature|
Back to top